This is a user manual for BMW Turbo Decoder HU92 at obdexpress.
How to use Turbo Decoder HU92 for BMW
Open the gate (pull it out) before you start working with HU92 decoder
The Turbo wheel (last wheel) must be all the way to the LEFT
Reset all 8 pins to position 0, 4pins on each side of the tool
(that is, push the pins all the way DOWN)
Resetting complete
Every time you insert the tool in the lock or pull it out of the lock, the gate must be closed (PUSH IT IN) and the Turbo wheel must be RIGHT
Open the gate (pull it out), push the Tension wheel only to LEFT when insert the tool
NOTE: when there is NO tension in the Turbo wheel, it means that the tool is not inserte correctly. Please close the gate (push it in), turn the tool around and open the gate. Then also push the Tension wheel only to LEFT.
Start “pumping” by turning the Turbo wheel all the way to the LEFT & releasing the Tension wheel
Repeat the procedure above
It is unlocked
Close the gate, turn the Turbo wheel to the RIGHT and then put it out.
BMW models supported:
1/M1
E81 2007-2011
E82 2007-2013
E87 2004-2011
E88 2007-2014
3/M3
E46 2000-2004
E90 2005-2011
E92 2007-2012
E93 2007-2013
5/M5
E39 late models
E60 2003-2010
6
E63 2003-2010
E64 2003-2010
7
E38 late models
E65 2001-2008
E66 2001-2008
E67 2001-2008
E68 2001-2008
X1
E84 2009-2011
X5
E53 late models
E70 2006-2013
X6
E71 2008-2014
Z3/M Z9
E36 late models
E38 late models
Z4/M Z4
E85 2003-2008
E89 2009-2011
Some Range Rover also ok
Customer Feedback on Turbo Decoder HU92
HU92 open BMW E92
Decoder HU92 open Range Rover