How to make key for Mazda 6 2013 using OBDSTAR F-100

This post step-by-step shows how to make new key for Mazda 6 2013 using OBDSTAR F-100, according the following parts, you will find it is very easy to use F100 key programmer, since the machine will display the instruction to guide you how to do next.

Car model:
Mazda 6 2013

Mazda key programmer to use:
OBDSTAR F-100 key programmer

It is very easy to operate by following next instruction:
Get on the car Mazda 6 2013, this is Mazda 6 key
Mazda 6 001 600x338 - How to make key for Mazda 6 2013 using OBDSTAR F-100 - How to make key for Mazda 6 2013 using OBDSTAR F-100
Mazda 6 key 01 600x338 - How to make key for Mazda 6 2013 using OBDSTAR F-100 - How to make key for Mazda 6 2013 using OBDSTAR F-100
Press the lock and unlock buttons of the following right key.
presss button 03 600x338 - How to make key for Mazda 6 2013 using OBDSTAR F-100 - How to make key for Mazda 6 2013 using OBDSTAR F-100
Connect OBDSTAR F100 key pro to the device and open it, you will find it can automatically read out Mazda V30.15.
mazda V30.15 - How to make key for Mazda 6 2013 using OBDSTAR F-100 -
Then loading…initializing..Authorizing
Select Atenza.
Atenza - How to make key for Mazda 6 2013 using OBDSTAR F-100 -
With smart
with smart - How to make key for Mazda 6 2013 using OBDSTAR F-100 -
Get message reading “All smart keys lost, add smart key, switch ignition on”. Then select “Switch ignition on “.
Then get another message reading “All the smart key out of the car 1 meters away. ” Then you should take the two smart keys out of the car 1 meter away.
Communication….
Then get prompt reading “Press and hold the vehicle start button for 10 seconds, Start button indicator li-”
press start button 600x338 - How to make key for Mazda 6 2013 using OBDSTAR F-100 - How to make key for Mazda 6 2013 using OBDSTAR F-100
(Press and hold the stat button till it turn red)
press button and turn red indictor 600x338 - How to make key for Mazda 6 2013 using OBDSTAR F-100 - How to make key for Mazda 6 2013 using OBDSTAR F-100
press button and turn red indictor 02 600x338 - How to make key for Mazda 6 2013 using OBDSTAR F-100 - How to make key for Mazda 6 2013 using OBDSTAR F-100
Back to the options “All smart keys lost, add smart key, switch ignition on”, and select “All smart keys lost” then get instruction “All smart keys will be erased. Min keys are required”. Press ENTER to continue, press ESC to return.
Then “Switch ignition on”
Get prompt “Current number of smart keys: 2. Press ENTER to continue, press ESC to return.
Configuring the system, please wait..
Reading vehicles information…
Ignition switch status is open? Click F100 button “ESC”, and according to the prompt to press and hold the vehicle start button for 10 seconds, Start button indicator light from green to yellow, Press the start button again, instrument to open.

Then configuration system…
Get message “Current number smart keys:0”

Erase complete
Take the keys back to the car.
Configuring the system, please wait…
Switch ignition off..
Switch ignition on.
Use a new smart key to contact start button, press Enter to continue.
After configuring the system, it will read out current number of smart keys is 1.
Program successfully.

To program next one, press ENTER to continue.
Turn off ignition-configuring the system- turn on ignition.
Use a new smart key to contact start button, press Enter to continue.
After configuring the system, it will read out current number of smart keys are 2.
Program successfully.

Press ESC to exist. Then get prompt reading “You have to complete the following procedures, engine can be started”
1.Switch ignition off.
2.Put on the brakes, the key 1 press start button to start the engine for 1 second, then turn off the ignition switch.
3.If you want to add more keys, please repeat procedure 2 , complete.
Test the new key, it is working.

(Visited 46 times, 1 visits today)
favicon - How to make key for Mazda 6 2013 using OBDSTAR F-100 - How to make key for Mazda 6 2013 using OBDSTAR F-100