How to use SK-670 Super Smart Car Key Machine to Copy ID/IC Card?
SK-670 Super Smart Car Key Machine ID-IC Card Copy Device can read and copy all 125KHz, 250KHz(PID encryption), 375KHz, 500KHz 625KHz,750KHz,875KHz,1000KHz ID card, also 13.56MHz IC card.
How to Copy ID Card with SK-670 Super Smart Car Key Machine
1,press (POW) button, screen displays the welcome word and voice prompt.
2, Click(ENT)button into the interface
3, Insert (Or put)your original ID card on the TX-Zone , and press (AUTO)button.
Then the machine will scan and check the frequency and output the card number, then screen display as following:
4,Put another our new ID card/tags on TX zone, press “WRITE” button,wait until screen displays as following:
How to Copy IC Card with SK-670 Super Smart Car Key Machine
1.If the original IC card hasn’t been encrypted, then you can copy it as ID card operation.
2.If encrypted, when read the card, machine will prompt : the card is encrypted, if crack it , please connect PC
3.Then follow steps as following:(Please remove the battery once connect the computer with USB cable)
1).Connect with computer with USB cable and wait until the USB driver installed well on your computer.(Please don’t press the “ENT”button, otherwise the driver couldn’t install well).
2).Double-click the computer (my computer) there will be a removable disk.
3)Double-click to open the mobile disk, there will be a software:VEB20151025.exe,copy this file to the computer desktop.
4)Press the confirm button(ENT) on the machine, put your original IC card on the TX-ZONE and read it, press double-click the “VEB20151025.exe ” file, then computer screen will display as following:
then click the “OK” button to entry.
5)Now your computer will display this following picture, Click”Start decoding” button to crack IC card
6)Each square represents an IC card data blocks, green color means has been decoded, red block means being decoding, dark gray means not decoding, white means invalid, blue bars represent decode progress.
When screen display “Decoding OK”, then put new IC card on the TX-Zone, press “WRITE” button and wait until the screen display”WRITE OK”,that means the code was written well to the new IC card (If screen displays “Fail to write”, please try to move the new IC card and try to write again or change another new IC card.)
It is better to use UID card to work with this machine.