Here you can get everything you need about 2012v / 2010v OPCOM for OPEL vehicle diagnosis, including the comparison list of opcom 1.59 VS opcom 1.45 VS opcom 1.39, OP-COM firmware PCB display, firmware & software update, and real customer feedback on OPCOM clone.
1. opcom 1.59 VS opcom 1.45 VS opcom 1.39
| opcom fw 1.59 | opcom fw 1.45 | opcom fw 1.39 | |
| Multiplexer |  |
 |
 |
| PCB board | Read high-definition picture under this table |
Read high-definition picture under this table |
Read high-definition picture under this table |
| Firmware version | V1.59 | 1.45 | 1.45 |
| Workable Software | VAUX-COM_120309a | VAUX-COM_120309a | Opcom090714 |
| Price | €16.99 | €18.50 | €22.99 |
| Language | English | English | English, German |
| OS | XP or Win7; make sure install dotnetfx35_SP1 system patch, or Opcom software can’t perform well; install on Win7 and open software, please choose Run as administrator |
XP | |
| Activation | No need activation | No need activation | No need activation |
| Installation | The video demo is on the CD in the package. | https://www.youtube.com/watch?v=V7v6nDwzLb8 | https://www.youtube.com/watch?v=w-33WcmgroM |
| Update | Can’t update | Can’t update | Can’t update |
2. PCB board/ look inside
Latest V1.59 Firmware PCB
Latest V1.45 Firmware PCB
True V1.39 Firmware PCB
3. clone Opcom firmware update
update clone Opcom firmware to 1.59 procedure
1): Download free 2014 op-com software, and install the program.
2010.08 opcom clone software Free download link:
http://pan.baidu.com/s/1kTvDJZT
2): Connect Op com 2014 china clone to the computer, and install the drivers correctly, Note: make sure disconnect the internet.
3): Open the OCflash and update the op-com with firmware 1.59 HEX file
4): Open the vaux-com software version is 2012.08, you can check opcom firmware version is upated to 1.59.
update clone Opcom firmware to 1.60 procedure
1. disable internet connection
2. install driver for op-com 1.45 from op-com 08.2010 driver cd in device manager i see op-com v2.0
3. then install VAUX-COM_120309a+131223d_GB+OcFlash China.exe
4. open OCFLASH FW UPG and load fw160.hex file
5. in oc flash – flashing mode is automatic
6. press flash and wait about 1 minute flashing is finished
7. after ocflash , use Mprog FTDI flash utiliy to change the FTDI 232R eeprom content . it should be seems that “USB Serial to converter” rather than “Opcom usb v2” interface . (you need to find the .ept file for ft232r ic)
8. next, install the FTDI drivers supplied with “VAUX-COM_120309a+131223d_GB+OcFlash China.exe” package.
9. lastly if you ‘re lucky, opcom interface should be works
(Ftdi chip with program called mprog)
4. OPCOM software free download & update
(Pls contact with Email: sales@OBDexpress.co.uk to get software file free)
5. customers feedback
opcom fw 1.59 customers feedback:
1)Opcom V1.60 is known to be buggy for Vectra-C so better to use v1.59 anyway
2) Op-com V1.59, Vectra C tested and its working like a charm
3) opcom v5 (1.59) hardware is the best cable. China clone V5 the one with real PIC18F458 works with 08/2010 china.
4) 150-200 Euros for an EU clone which is a disgrace (they neither made the original software, nor hardware, nor license hack, they just pick up the profit by selling for ridiculous amount somebody else’s work). I would rather to spend €16.99 Free shipping worth v5 from China. It works.
opcom fw 1.45 customers feedback:
1) I did a quick test on Astra J 2013 year and it worked well. Connection to all modules. In some of them there are only error reading but anyway it is a big progress since the 2010 version and a light at the and of a tunnel for future updates.
2) I try on astra-h working good firmware 1.45
3) Vectra B 2.0 dtl. All work.
4) corsa c z10 work ok
5) opel vivaro 2002 1.9dti work
6) work fine with Astra 2012, 2.0 diesel
7) opel vectra c 2004 all ok.
8) Woks Ok for me in all modules ,the program update firmware but all is ok
I made a diagnose on all controlers of a corsa c 2001 z10 xe. And work fine.
9) Tested on Vectra b and it’s working like a charm.
