How to update Ktag/Kess v2 software to Ksuite v2.11
Hi guys, good news for you all. i have updated my Kess V2 2.10 with firmware 3.099 to 2.11 software. And also use the Ksuite 2.11 to get it run on Ktag with 5.010 fw. Everything works great in Kess + Ktag.
Software Ksuite 2.10:
Lets see what you need :
1.First you need to download files for your sd card
Ktag 2.11 SD card Files
This is not uploaded by me
2.You need to download Ksuite 2.11 files
incl 4 files: part 1-part 4
If you got security pop up just ignore that..
This image is on my language for you be different but for English user to ignore this go on “Details” bottom left corner , when open new text just click “Visit this site” something like that
AFTER DOWNLOAD DISCONNECT FROM INTERNET ITS SAFIER FOR YOUR KESS YOU CAN FORGOT TO DO IT LATER
When you download all that you need to open kess v2 tool box and unscrew this 4 screws:
When you unscrew just pull out the mainboard
P.S Unplug from electricity
In red area, it is the sd card for the kess
Get out sd card . I used android phone to connect card and PC
When you open sd card you will got this 4 folders:
Make a backup like a did , just copy this file to new folder and rename it Kess 2.10 files etc etc what you like…
I make like this
Make sure to save this if something goes wrong
After you make a copy delete all from Kess SD card .
Than copy SD 2.11 files to Kess SD card
When its done , bring back SD card to Kess mainboard make sure to put it right and lock her.
When you lock sd card put back mainboard into kess box and close it with screws.
DO NOT CONNECT YET KESS WITH PC OR POWER JUST MOVE TO THE SIDE
We finished First part of this
Now to install 2.11 Software to pc
Unpack all downloaded parts to one folder (i mean on Ksuite part 1,2,3,4)
Just look this video it’s better to see than to read
VIDEO: HOW TO INSTALL KESS 2.11 TO YOUR PC
Watch from 1:05 to 2:30
Just copy all new files to Ksuite folder its easy , but i suggest to make a copy of old files
When process finish you got Ksuite with 2.11 software
Some pictures after updating
PLS DO NOT CONNECT TO INTERNET WHEN YOU USE KESS v2 EVEN IF IT IS “UPDATED”
Note: kess v2 & ktag software update solutions above are offered by Nemanja in the CT community. (BIG THANKS!!!!!!!!!!!!!) BUT it’s not tested by pros. Not sure that it works for all kess/ktag. Probably use with unknown security.
For sake of security, you can try tested versions:
And if K-suite v2.11 is too old for you, newer versions also have tested OK by pros:
Except software update, firmware update is available at obd2epress.co.uk.