2010-2018 Porsche BCM Add New Key: Mini ACDP Confirmed!

Tested successfully! Yanhua Mini ACDP is able to make new keys to Porsche 2010-2018.

 

Tool: Yanhua Mini ACDP + Module 10

mini-acdp-porsche-add-new-key

Time: around 8 minutes

Video demo:

Step-by-step instruction:

 

Run Mini ACDP Porsche software

mini-acdp-porsche-add-new-key-6

ACDP starts to add new keys to Porsche…

Add new key for new Porsche – ICP IMMO – MC9S12XEP100 (Mask 1N35H) – Add key (auto mode)

mini-acdp-porsche-add-new-key-

mini-acdp-porsche-add-new-key-10

Note:

– Pls prepare OBP+ICP adapter, BCM interface board, BCM module, BAV adapter and blank key

– It is forbidden to cut ACDP power off during the process of adding a key

– Pls store the original and programmed EEPROM/DFLASH data as prompts.

mini-acdp-porsche-add-new-key-11

Note:

– Pls connect ACDP device, OBP+ICP adapter, BCM interface board, BCM module

– Check the crystal oscillator package of BCM module: EXT1 short – circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator

– Save the chip data read by the BCM module according to the software tips

mini-acdp-porsche-add-new-key-12

mini-acdp-porsche-add-new-key- mini-acdp-porsche-add-new-key-3 mini-acdp-porsche-add-new-key-5

Pin detection status:

When EXT contact is bad, check the EXT1 pin if the crystal oscillator is ceramic packaged or EXT2 pin if it’s metal packaged

mini-acdp-porsche-add-new-key-13

It’s detected that the BCM module chip has been encrypted. Continue

mini-acdp-porsche-add-new-key-14

Read PFLASH, EEPROM/DFLASH data and save data

mini-acdp-porsche-add-new-key-18

mini-acdp-porsche-add-new-key- mini-acdp-porsche-add-new-key-20

mini-acdp-porsche-add-new-key-21

mini-acdp-porsche-add-new-key-22

Immo information:

Pls make sure the info is correct

mini-acdp-porsche-add-new-key-23

Note:

– Keep the ACDP device power on

Disconnect the OBP+ICP adapter and ACDP device firstly. (Keep the OBD+ICP adapter, BCM interface board and BCM module connected)

– Connect the ACDP device to the BAV-KEY adapter and put the key correctly in the BAV-KEY adapter

mini-acdp-porsche-add-new-key-25

ACDP read out the current key ID

mini-acdp-porsche-add-new-key-26

Select a number for adding a key

(the gray number is not optional, that mean this key number is already used or current key is already exit)

mini-acdp-porsche-add-new-key-27

Mini ACDP is rogramming key…

mini-acdp-porsche-add-new-key-28

Store DFLASH data

mini-acdp-porsche-add-new-key-30

Note:

– Keep the ACDP device power on

Disconnect the OBP+ICP adapter and ACDP device firstly.

– Connect the ACDP device, OBD+ICP adapter, BCM interface board and BCM module

– Check the crystal oscillator package of BCM module: EXT1 short – circuited for ceramic packaged crystal oscillator, EXT2 short-circuited for metal packaged crystal oscillator

mini-acdp-porsche-add-new-key-

mini-acdp-porsche-add-new-key-32

Pin detection status

mini-acdp-porsche-add-new-key-33

It’s detected that the BCM module chip has been encrypted

mini-acdp-porsche-add-new-key-34

Check the key information

mini-acdp-porsche-add-new-key-

mini-acdp-porsche-add-new-key-37

Adding key completed

Pls install the BCM module back to the vehicle to confirm that the new key can be used normalyy

mini-acdp-porsche-add-new-key-39

Success

 

 

 

 

Share