VXDIAG DoIP device DONET Settings Procedure

To the users of VXDIAG SE Series & VXDIAG DOIP with V83***/V94*****: when you wanna remote assistance for diagnosis/programming/coding from a VXDIAG engineer, please firstly set the DoNet by following instruction.

 

Prepare:

– A mobile phone which support “HotSpot”.

– vxdiag device (VXDIAG SE or VXDIAG DOIP).

– A car. (Porsche 2, Porsche 3 (Doip), BMW (Doip), Mercedes-Benz (Doip), Ford, Mazda, GM (Chevrolet, Buick, GMC, Cadillac, Holden, Opel, Vauxhall Pontiac, Hummer, Saab , Saturn) VAG (VW, AUDI, Seat, Skoda, Bentley, Lamborghini) Land Rover, Jaguar, Subaru, Volvo)

– One computer (No operation system limitation)

– Open www.vxdiag.net to download vx manager.

– A pen.

 

Step3:

Step 1. Set the ” HotSpot” on your phone.

Step 2. Connect the network with the VXdiag device.

Step 3. Connect Vxidag Device to PC via DONET.

 

Let’s start one by one.

Step 1. Set the ” HotSpot” on your phone.

Open “Setting” -> select “Network & Internet” -> “Hotspot &tethering” -> Turn on ” WLAN HotSpot” -> ” Set up WLAN HotSpot” – > Network Name “DiagOnNet”,Password “DiagOnNet”, AP band “2.4 GHz band”.

Vxdiag Benz Se Donet Settings 01 Vxdiag Benz Se Donet Settings 02 Vxdiag Benz Se Donet Settings 03 Vxdiag Benz Se Donet Settings 04 Vxdiag Benz Se Donet Settings 05

 

Step 2. Connect network with the vxdiag device.

  1. Insert vxdiag device into the OBD2 port of the car, then the device will have power ( in the following image, our engineer connect it to Godiag GT100). Then the WIFI indicator will flash twice and beep and keeps on, means the device is trying to connect the network, you don’t need to do nothing, just wait for a while, it will search network automatically when the wifi indicator flashes again.

Vxdiag Benz Se Donet Settings 06

 

  1. After hearing the vxdiag device beep again, use a pen or tool to hold the “Reset” Button for 3 seconds, then you will hear beep again.

Vxdiag Benz Se Donet Settings 07 Donet Setting 9

If you have VXDIAG SE device, press “Fn” Button for 3 seconds.

Vxdiag Benz Se Donet Settings 09

 

If you have VXDIAG VCX Device with V71****, please open the device to find S2 button

Donet Setting 10

 

  1. The device will flash again, which means it is connecting to the HotSpot. If the device flashes quickly, means it is connected to the HotSpot successfully, and you will find on HotSpot on the phone.

Vxdiag Benz Se Donet Settings 11

 

Step 3. Connect Vxidag Device to PC via DONET.

 

  1. Browse www.vxdiag.net, scroll down until you see “VX Manager”, click on it to download and install on your computer.

 

  1. Open VX Manager on laptop, since the device is not connected to the comptuer, you will see “No Device (Auto)”.

Vxdiag Benz Se Donet Settings 12

 

  1. Click on “Remote Diag”, input Device ID (Serial number), click on “Refresh device”, wait until it displays the device information, click on “Connect device”, wait until it is connected successfully.

Vxdiag Benz Se Donet Settings 13 Vxdiag Benz Se Donet Settings 14

 

  1. vx manager will restart automatically. After restart, you will find the device is connected by DONET. You are ready to enjoy remote diagnosis / programming /coding from VXDIAG.

Vxdiag Benz Se Donet Settings 15

 

 

Vxdiag Benz Se Donet Settings 16

 

Then you can close vx manager, it would show DoNet connected at the right down corner on the task bar.

Vxdiag Benz Se Donet Settings 17

Since vxdiag device connected, you can use the car diagnostic software with vxdiag driver installed to work.

https://www.obdexpress.co.uk/

Share