How to Install PADFLASH Software & Driver on WIN7 WIN10 WIN11? (2025 Latest)

Here shares the latest PADFLASH Software & Driver installation guide, updated on May 28, 2025.

Please follow the step-by-step instructions carefully to ensure proper operation.

 

System Requirements

Operating System:

• Windows 7 64-bit (strongly recommended)
• Windows 10 64-bit (supported)
• Windows 11 (requires additional configuration)

Hardware:

• Minimum 4GB RAM
• Minimum 2.5GHz CPU

Installation Steps

Step 1: Visit the Official Website

• Go to: https://padflashr.uk
• Navigate to the Download section and download the required software and drivers.

 

Step 2: Access the Download Page

• Enter your email address and tool serial number (SN) to access the downloads.

 

Step 3: Install Patches

• Run the “PATCH INSTALL”
• Install the Super Driver using Administrator Mode.
• Install the Laptop Patch Fix.

 

Important:
Disable Windows Defender completely:

• On Windows 7/10/11, turn off  Real-time Protection and all related security features.

 

Step 4: Install PADFLASHR Software

• Run the PADFLASHR software installer.
• Enter your email and tool SN to complete registration.
• After registration, restart the PADFLASHR Updater.

 

Step 5: Update Software

• After restarting, the updater will automatically begin downloading update files.
• Wait until the download is complete.
• Then restart the updater three times to finalize setup.

 

Step 6: Connect and Install Drivers

• Connect the PADFLASH ECU & TCU Programmer and dongle.

 

• Install the dongle driver when prompted.

• Connect the tool and install the tool drivers.

 

Important Setup Note

1. Ensure PADFLASHR Updater.exe is running.
2. Navigate to:
   C:\Windows\systembin\pdata
3. Locate PADFlash.exe
   
4. Right-click → Properties → Set to “Run as Administrator”.
5. Launch padflash.exe in Admin mode. A prompt will appear requesting your tool Serial Number (in uppercase).
6. Enter your serial number to log in.

 

Final Activation Steps

1. Run padflashr updater.exe, then click “Activate”.
   (Do not run padflash.exe directly from the desktop.)
2. When prompted, enter your tool serial number in capital letters.
3. Once the software opens, click “Activate FW” to apply the firmware license.

Note:
Each time you restart the software, you must click “Activate FW” again to refresh the Padflash tool firmware.

Important Notes for Windows 10/11 Users

• You must disable Windows Defender and Real-Time Protection completely to ensure stable operation.
• If the tool doesn’t function properly or the software fails to launch, your system may be missing essential patches.
• In such cases, please contact remote support for assistance with refreshing your Windows system.

www.obdexpress.co.uk