Using OBDSTAR X300 Pro3 to make keys to Toyota G key is easy and cheap, to the same result, Car dealers will charge $1000+ to make keys when all key lost, now X300 Pro3 can save 1/2 the price. Follow the procedure below.
You should realize that OBDSTAR X300 Pro3 can not only program keys but also do some special functions such as Odometer Adjustment+EEPROM/PIC+OBDII…
Device: only OBDSTAR X300 Pro3
Vehicle model and year: TOYOTA HILUX VIGO 2010
G chip key
Now all key lost, when insert new key, the security light do not go off, that means the key is new one.
Turn on with the new key
Go to the key master and Choose IMMOBILIZER -> TOYOTA/LEXUS -> TOYOTA/LEXUS V31.09
It is loading…
Initializing…
Authorizing…
Choose “Immobiliser” and press ENTER
Type 2(with G 72)
Reset immobiliser (All key lost)
Switch ignition off and press ENT to continue
Switch ignition on and press ENT
Switch ignition off and remove the key, then press ENT
X300 key master is configuring the system, wait…
Switch ignition on and press ENT
X300 key master is configuring the system, wait…
Now the security light steady prompt
Switch ignition off and remove the key, then press ENT
X300 Pro3 will prompt you:
For make only 1 key: turn on with new key for 5 seconds then turn on-off 5 times until security light go off.
Done! Reset TOYOTA G Chip with key master success!
Now it can start