Test reports: Vxdiag vcx nano Ford on Lincoln Navigator 2004
Purpose: Ride Height Calibration
Vehicle specification:
Vehicle: NAV
Engine type: 4V
Capacity: 5.4L
Transmission: Automatic
Fuel type: Gasoline
Emission level: Federal Emission
Ford diagnostic tool:Allscanner VXDIAG VCX NANO Ford
Diagnostic system: Ford IDS v86 v100 v101
Procedure: How to use Vxdiag Ford for Ride Height Calibration
Turn the ignition to the ON position
Exit the vehicle, close all doors and allow…to kneel height (approx. 45 seconds)
With the ignition ON…into DRIVE and then back into PARK
Exit the vehicle, close all doors…to trim height
(approx. 45 seconds)
Open the left front door
Measure the ride height
On the following screen, adjust the ride height and then save the newly calibrated values (while outside the vehicle)
Test result:
Ford IDS v86 Ride Height Calibration on Navigator 2004: Failed
Ford IDS v100 Ride Height Calibration on Navigator 2004: Failed
Ford IDS v101 Ride Height Calibration on Navigator 2004: Failed
Vxdiag vcx nano Ford cannot supportLincoln Navigator 2004
Error: testman error. Record these numbers: 12 50 331069
Error: testman error. Record these numbers: 12 50 8928
Error: testman error. Record these numbers: 12 56 253662
