Topic: MPPS V18 software download free, tested OS, carlist, reviews (Ford, VAG, Fiat etc). All you need here.
MPPS V18 software download free (ISO):
https://mega.nz/#!9Dpg3JwL!PFVR8bbMhC8HaDhBE075IP8iryOdbHDk3kkBNqmShiw
Size: 19.5MB
Contributor: obdexpress.co.uk engineer
Pass: No need
Compatible hardware:
MPPS hardware v18 & hardware v21
Look at MPPS V18 PCB
***Please make sure your MPPS hardware has the same PCB, otherwise you can’t download the above software to work with, I’m afraid the cable will be locked.
The above MPPS hardware is from obdexpress.co.uk (Item No. SE134).
Compatible OS:
->WIN7: 100% OK, no problem on all cars.
-> MPPS v18 Windows 10:
It works good in win 8 and win 10 both x64, software will only start when cable gets power from car. Windows 10 32 and 64 wish it worked on xp still tho ..
-> Mpps v18 Windows 8:
Tested BMW EDC16C31 , read/write OK from windows 8 64bit
Does not run with Windows 8 x64
* Mpps v18 Windows 7 should be the best solutions of mpps tuning work.
For mpps v18 clone, Windows 7 is 100% OK, WIN XP, WIN 8, WIN 10 needs luck.
MPPS V18 China car list:
http://www.obdexpress.co.uk/upload/service/19120115752527511816.pdf
MPPS covers a range of controllers:
M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic, etc.
MPPS V18 Win7 feedback:
So far…MPPS V18 worked on everything l have tested on.
edc16 obd ‘renaults’ tricore pcr2.1ok
edc17c10 ok
boot volvo edc17cp22 ok
marelli 6o2 multi k-line ok
and some others. ok
I did all cars no problem. It can even write full flash to EDC1616 Opel
Have done EDC16U1 more than 20 at this moment with no problem!
I have done them more than 30…
I tried today another edc16u1 and can read and write…
Only that one can not
It’s reading my alfa romeo EDC16C39
Astra h 1.9 tva off OBD and Zafira B 1.9 EGR off OFF ok, just choose read all( where available)
simos pcr 2.1 R/W obd ok
was unlocked few months ago with ktag
ME7.3.H4 boot mode read /write full OK
Peugeot 807 ECU DELPHI DCM 3.5 READ OBD OK
MED17.4 Peugeot 207 read write ok
Citroen c5 DCM3.5 read write OBD ok, checksum ok
Opel cdti 1.7 ecu Denso R/W ok
Linea 2011 Marelli 6F3 read/write OBD Trought K-line, ( FG 54 read only flash trought CAN)
VW PCR 2.1 work v18 clone no problem
read and write on bench
Fiat Scudo as (Peugeot 3008) 2.0 HDI Delphi DCM 3.5
R/W OBD/CAN (CRC=OK) = OK
Fiat Stilo IAW6JF.P3, through OBD, mpc and eeprom read write for immo-off, all ok.
multiboot OBD
Ford Fusion 1.4 TDCi Siemens Sid 804 R/W OBD CAN = OK
DENSO_SH7058_OPEL
cdti zafria B z17dtj 2010 kw 108-81
worked for me..also astra J on 2011 with Denso 1.5mb
MPPS sw: v21 /sw: v18.12.3.8 + fw: v1.08.21= reading / writing ecu(TRICORE + MULTIBOOT) + checksum.
MPPS V18 clone Ford:
Ford – SID206
Opel – EDC16C9/39,PSG16CANR/W OBD ok
Ford edc16c34 2.20 r/w ok
yesterday i have tested mpps v18 into my Ford Focus 2 edc16c34.
read about 10 min and write 3-4 min
Focus, read 3 sectors about 10 min and write 4,20 min than wait 3 min.
after that 3 min I wait another 2 min, like software says.
MPPS is renown for Issues on the Focus 1.6tdci Edc16 ecu,
so much so i never ever tried, always same story mpps.
Always used Fgtech on these, and no issues,
I would BDM or use any tool other than MPPS whatever version
I come back with news about edc16c34 Ford…
the news is this is a good tool.
mpps did not corrupt my eep, file that i was made it was bad, in my happiness and stupidity I put into IQ maps, 65mg fuel without changing IQ limit, 60mg
i have write that file with galletto and same problem.
today I have write another file (good one) with mpps v18 and it was very good.
ford edc16c34 2.20 r/w ok
I can’t wait to see if can do edc16c34 5.95
MPPS V18 VAG (audi, vw, skoda, seat):
Golf 1.6 TDI Siemens Simos Pcr2.1
R/W can (unlock boot mode-ok) – ok
easy A4 2.5L edc15v
obd mode
read and write
kess didn’t want to read this tho ? might of been voltage l read at the guys place(fans on with read and write) and wrote at mine with charger but didn’t try kess again
Golf TDI EDC17c14
Boot mode.
read / write all ok,
Skoda Fabia 1.9SDI EDC15V+ ….
generic eeprom OBD K-line R/W-OK
Flash OBD K-line R/W-OK
Skoda Octavia 2.0 Tdi edc16
all good
Vw Caravelle 1998 msa 15.5
same I’d okay but not read
ECU EDC17 on Audi a6 2009
this tool read via boot
Polo SIMOS 3PE 1.2 12v
read/write as generic simens SIM4LE boot mode flash 512kB – OK (catalyst off).
Chinese MPPS V18 Opel:
Opel – EDC16C9/39, PSG16 via CAN OBD read and write ok
Opel Corsa marelli 1.3cdti OK
(Be sure to run as administrator using windows 7)
Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO)
Read and write via OBD (CAN) OK
MJD 6JF Fiat/Opel micro+ eeprom
R/W OBD – K line (MPC555+95320) OK
Opel Signum PSG16 2.2CDTI
read as a Zafira by OBD all OK
Opel Astra 2.0 16V CDTI BOSCH PSG16It
auto checksum and read/write OK
Opel 602/3 full read/write Micro, Flash, EEPROM, via k-line & CAN ok
Opel 603 full R/W Micro, Flash, EEPROM, via k-line & CAN ok
Opel 6JO full read/write Micro & EEPROM, OK via k-line (CAN)
Moreover, MPPS V18 reviews:
eeprom available
full boot
read normally, Not so OBD, just flash
Jaguar X type, 2.7TD V6option is can only sid 204
ID Ecu ok and lists DTC etc.
China clone: EDC17C10 PSA
boot mode
Read OK 3:30min – faster than Ktag, Kess and FGtech.
read and write edc16u34 on bench after immo off,
read and write is fast about 10 minutes 2mb ,
tried kess using mpps tricore lead and read and write 40 minutes for 1mb
suzuki vitara hdi edc15c2
R/W ok dtc deleted automatically before read.
Mitsubishi pajero 3.2l
did denso 4m41 R/W ok (chinese)
OPEL Signum PSG16
2.2CDTI readout as a Zafira.all OK.Through OBD.
Corsa 1.3cdti marelli mjd6
reads writes ok, (OBD)
Did a data area only not full read,
But lost inj coding on writing MOD.
PSG16 only can.
If k-line (zafira A) R/W konekt pump can.
China clone: Magneti marelli 6F0
full read/write by OBD MPC,Flash EEPROM OK!
Astra H Denso Z17DTJ
R/W CAN – ok
SEAT ME7.5.10
R/W k-line (cat_off) – ok
tested today on psa 207 edc16c34
Can R/W ok and ducato edc16c39 RW ok
Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO)
– R/W OBD(CAN)- ok.
MJD 6JF Fiat/Opel micro+eeprom
R/W ok.
Citroen relay/jumper 2
read id but won’t read
mine came, read and write td5 Landrover,
tricore read and write edc17c10 and unlock pcr2.1
Corsa D 1.3 CDTI, EDC17C18, 70.0kw,2010, Z13DTE
R/W bootmode TriCore™ = OK
BMW e91 330xd edc16c35
R-W OK with mpps China clone
Astra vxr me7.6.2
R/W OK ( do that ecu own risk ! )
Fiat Doblo 1.3 mjet mjd6f3 obd – r/w ok
Range Rover edc17cp11 boot – r/w ok
this tool looks great
PSG16 ok can obd,
if k-line obd only pump pin can R/W.
Lacetti (2008y) 2.0 CDRi EDC16C39
R/W CAN (only map 2Mb) as Captiva = OK
Mazda 3 1,6 TD
2009 car, edc16c34 – LIKE focus
Read . write OBD fine,
reads 3 times or 3 areas so bar goes 100% then start again weird, never before seen like this, same on write 2 times I think bar goes across,
then 99% wait 4 mins or so, was beginning to think BAD NEWs, then all ok,
car perfect file on ecu,
unlock siemens simos pcr 1.6 tdi
tested on a cosra z10xep bosch med1.1.5
r/w , write in slow only ,
kess eu was the same only write slow speed too
delete dtc.
That’s all.
Thanks