My experience with Digiprog 3 Odometer Programmer.
Mercedes Benz OBD
w211 30 seconds
w212 pre-facelift 30 seconds (EIS)
w203 face lift 30 sec
w204 pre facelift 30 sec (EIS)
facelift 30 sec (EIS)
VW GOLF 4,5,6 OK OBD2
MOST TOYOTA OK NO PROBLEM EEPROM
70 percent Nissan, not good for navara/pathfinder 9s12, older dash works but certain one kills dash
Old ford ranger mcu dash ok solder pins on back
Another good tip is to make your own icp cable for digiprog , download cable pinout and make 123458 for in circuit programming works very well.
hope this info can help.
More Digiprog 3 V4.94 mileage correction feedback:
http://www.mileageprogrammer.com/digiprog3-v4-94-mileage-correction-feedback/