Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display

Autel MaxiCOM MK906PRO is the upgrade version of MS906TS, MS906BT, MS906PRO and MK908. It is based on the Android operating system and featured with the best possible coverage of ECU coding, Bi-Directional control, 36+ services, offline programming, OE-level diagnostics and battery testing capability (required BT506).

autel mk906 pro register update function menu display 1 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

 

Part 1.Autel MK906 Pro Package list

It comes with the following items:

1 x Main Unit

1 x MaxiVCI V200

1 x AC/DC Adapter (12V)

1 x Type-C USB Cable

1 x Auxiliary Power Outlet Adapter

2 x Spare Fuse 6x30mm

1 x USB to Ethernet Adapter

1 x Quick Reference Guide

1 x Packing List

1 x Soft Cloth

1 x Carrying Case

autel mk906 pro register update function menu display 2 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

 

Part 2. Autel MK906 Pro register and update

When you use MaxiCOM MK906 Pro for the first time, you should connect MK906Pro to Wi-Fi, then go to create an Autel ID with email, verification code and password, and register the device with SN and password. Finally update the software to use.

Note: You also can register Autel ID on website pro.autel.com. Just input the related personal info to complete registration.

 

Part 3. Autel MaxiCOM MK906 Pro function menu display

(Basic diagnosis+ 39 special functions+ vehicle coverage +language)

  1. Basic diagnosis

Plug the VCI into the car OBD interface

Tap Diagnostic>> EOBD>> Accept the disclaimer

autel mk906 pro register update function menu display 3 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

autel mk906 pro register update function menu display 4 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

Tick stand-alone diagnostics and tap OK

Establish connection to the VCI

Make sure the VCI is connected to the vehicle and the ignition is ON

Wait about 10 seconds while the MaxiCOM scanner establishes communication.

Tap Autoscan

Confirm the info detect out

autel mk906 pro register update function menu display 5 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

In the function menu, we can perform DTC&FFD, I/M readiness, live data, on-board monitor, component test. Vehicle info and vehicle status

Read live data

autel mk906 pro register update function menu display 6 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

Read DTC&FFD

autel mk906 pro register update function menu display 7 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

I/M readiness

There are two options: Since DTCs cleared and This driving cycle

autel mk906 pro register update function menu display 8 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

Vehicle information

Turn key ON with engine OFF

Then can read vehicle general information and vehicle enhance information

autel mk906 pro register update function menu display 9 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

 

  1. Service (39 Special function)

Oil reset, EPB, TPMS, BMS, Brake bleed, Aftertreatment, Immo Keys, Injector, SAS, Suspension, Throttle, WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, ABS& SRS, Cylinder, VGT Learn, Speed& PTO, Clutch, Trans Adaptation, Airbag Reset, A/F Setting, Automatic Start/Stop, Electronic Water Pimp Start, EGR, Vin, FRM Reset, Transport Mode, HV Battery, ACC, A/C, Rain/Light Sensor, Gateway Module Data Calibration, Reset Control Unit, Center Console Display Service History

autel mk906 pro register update function menu display 10 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

autel mk906 pro register update function menu display 11 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

  1. Extensive Vehicle Coverage

Asia:

Acura, Daewoo, Daihatsu, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, SsangYong, Subaru, Suzuki, Toyota, GTR, Scion

 

Europe:

Benz, Sprinter, BMW, Fiat, LandRover, Maserati, Opel, Peugeot, Porsche, Lancia, LT3, Maybach, Mini, Seat, Skoda, Vauxhall, Renault, Saab, Smart, Volvo, Volkswagen, Abarth, Alfa, Audi, Bentley, Citroen, Dacia, Ford, Jaguar, Lambor Ghini

 

USA:

GM, GMC, Ford, Chrysler, Dodge, Jeep

 

  1. Multi-Language Supported:

English, Simplified Chinese, Traditional Chinese, Spanish, French, German, Russian, Italian, Japanese, Korean, Dutch, Portuguese, Swedish, Farsi, Turkish, Thai, Vietnamese, Hebrew, Arabic, Indonesian, Cambodian, Polish

Note: the default language is English, offer your device S/N to our customer service for language changing.

autel mk906 pro register update function menu display 12 - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing, Register, Update and Function Menu Display

 

More info of 2022 Autel MaxiCOM MK906PRO Automotive Full System Diagnostic Tool:

https://www.obdexpress.co.uk/wholesale/autel-maxicom-mk906pro.html

 

www.obdexpress.co.uk

(Visited 133 times, 1 visits today)
favicon - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display - Autel MK906 Pro Unboxing+ Register+ Update+ Function Menu Display