Super ICOM Pro N3+ is a new BMW diagnostic tool. It’s the upgraded version of the BMW’s special inspection device A1, A2, A3 and N3. It’s 100% compatible with the original BWM special inspection software without any software changes, and added J2534 and DOIP. What’s the difference between them? What’s new of N3+? Check the detailed comparison below.
Comparison Table:
Item | Super ICOM Pro N3+ | Super MB Pro N3 | BMW ICOM Next |
Image | |||
Price | € 247 | € 209 | € 195 |
Solution | Original ICOM Next solution | Original ICOM Next solution | Various solutions, usually use VXDIAG solution |
ICOM Software | BMW ISTA-D BMW ISTA-PE-sysWinKFPTool32INPABMW Coding toolNcs ExpertKSD2 |
BMW ISTA-D BMW ISTA-PE-sysWinKFPTool32INPABMW Coding toolNcs ExpertKSD2 |
BMW ISTA-D BMW ISTA-PE-sysWinKFPTool32INPABMW Coding toolNcs ExpertKSD2 |
BMW App | BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, XDelete, M Flasher, etc | BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, XDelete, M Flasher, etc |
No |
Compatible HDD/SSD | Compatible with both ICOM Next (SS220 series) and VXDIAG HDD/SSD |
Compatible with
both ICOM Next (SS220 series) and VXDIAG HDD/SSD |
Compatible with vxdiag HDD/SSD only |
Software update | By HDD/SSD | By HDD/SSD | By HDD/SSD |
Firmware version | ApplicationImage:147 BootImage: 130 |
ApplicationImage:147 BootImage: 130 |
1.9.3.1 |
Firmware Update | Use the same procedure as the original ICOM Nexthttp://192.168.92.38.60080/, user name: root password: NZY11502 |
Use the same procedure as the original ICOM Nexthttp://192.168.92.38.60080/, user name: root password: NZY11502 |
Via VX Manager |
Connection | USB (USB 3.0), WiFi (direct connection) WiFi password: 12345678No IP setting (only 1st time). Easy to connect |
USB (USB 3.0), WiFi (direct connection) WiFi password: 12345678No IP setting (only 1st time). Easy to connect |
USB (Type-C), WiFi (via a router) WiFi password: 12345678No need for DHCP server or router, it’s build in. |
Vehicle Model Supported | BMW, Mini, Rolls-Royce, BMW motorcycle | BMW, Mini, Rolls-Royce, BMW motorcycle | BMW, Mini, Rolls-Royce |
Heat Dissipation | Dual Heat Dissipation | Dual Heat Dissipation | No |
20-PIN Vehicle | Yes, with an optional 20-pin adapter for older BMW | Yes, with an optional 20-pin adapter for older BMW | No |
10-PIN BMW Motorcycle | Yes, with an optional 10-pin adapter for motors | Yes, with an optional 10-pin adapter | No |
One-key switch button | Yes | No | No |
DoIP protocol | Yes, Support Benz, VAG, JLR DoIP vehicles | No | No |
J2534 | Can be used as J2534 passthru device. Compatible with Honda HDS, techstream, JLR SDD, VAG ODIS, etc |
No | No |
In Sum:
Super ICOM Pro N3+=BWM special inspection+J2534+DOIP+WIFI
It covers all functions of N3, and both of them adapt original ICOM solution which allows firmware update from ICOM server. ICOM Next is a specific BMW dealer level diagnostic scanner. The clone uses different solution, so it cannot scan non-OBDII older models or motorcycles.
Besides, N3+ also supports both DOIP and J2534, and has a one-key switch button to freely switch between ICOM software and J2534/DoIP software.
N3+ J2534 /DOIP one key switch function:
Super ICOM Pro N3 Plus can use the J2534 protocol to read through after switching with one key. It is compatible with the 6-pin and 14-pin CAN communication and the 7-pin K-line communication of the OBD port. It can use Volkswagen, Mercedes-Benz, Toyota, Honda, Land Rover and other special inspection software with J2534 interface.
N3+ can use DOIP network communication protocol after one-key switching, which can solve the problem that Volkswagen 5054 and Mercedes-Benz C4 cannot test new cars without DOIP.
NOTE:
- For Mercedes- Benz:
It needs to activate J2534 authorization so far (free of charge before October 1st, 2023). Other vehicles do not need.
After activation, install J2534 switching software to work with.
(You can use J2534 switching software if you have. If not, contact us to help with remote installation and activation from the factory.)
Only after switching, then can use MB SD C4 Xentry software (newest version: 2023.06, item No. SS221-10 or SS221-A10B)
In short, for Mercedes- Benz, open authorization+ install J2534 switching software+ install Xentry software.
- For Honda/TOYOTA/ GM GDS2/ VW, etc…
Can switch the protocol to use directly, no need authorization!
But need to install JLR Mongooses Passthru driver (J2534 MongoosePro ISO Setup) and related J2534 software
Download and install J2534 software
- Free download Honda HDS 3.104.024
- Free download GDS2 V2023.05 + tech2win:
2023 Deliverables and Installs – GM Global v2023.5.0 ; GM China v2023.4.4 and GDS2 version 22.4.05000.
Tech2win with patch
- Free Download TOYOTA Techstream V18.00.008:
Techstream 18.00.008 setup
Toyota Launcher Patch Download
Password: 8888
Software version: ODIS V11+ PostSetup
- Download and install N3+ J2534 driver
(If the link is expired, contact our customer service to get a new download link.)
For more info of Super ICOM Pro N3 BMW diagnostic tool, check https://www.obdexpress.co.uk/wholesale/super-icom-pro-n3-plus-bmw.html.
Contact Information
- Email: sales@OBDexpress.co.uk
- Skype: obd2express.co.uk
- WhatsApp Business: +44 7418609676
- WhatsApp After-sales Service: +86 18750906257
- WeChat(微信): 15705931767
Working Time: 9:00 am – 18:00 pm (UTC+08:00), Monday to Friday.