Here are some tutorials about using Godiag GT107+ DSG Plus Gearbox Data Adapter with different devices (Autel scanner/Foxflash/Kess V2/PCMtuner/Openport 2.0) to diagnose and read VAG DQ200 gearbox ECU.
Godiag GT107+ and Autel scanner diagnose DQ200 (in manual mode):
Connection:
- Take out the Autel MaxiVCI Mini, and pair it and the Autel diagnostic scanner via Bluetooth
- Connect VCI to Godiag GT107+ DSG Plus Gearbox Adapter
- Then connect GT107+ to DQ200 gearbox via the Godiag DB9 DSG Gearbox Universal Conversion Jumper according to the pinout
- Connect the 12V 2A DC power supply to Godiag GT107+ Adapter
- Press GT107+ Automatic/Manual power analog ignition switch and 120 ohm switch
Operation:
Select Diagnostics>> EOBD>> Accept the disclaimer>> Autoscan
Identify the protocol successfully
Read DTC & FFD
Read Live Data
Turn key ON with engine OFF to read vehicle generation information
Godiag GT107+ DSG Plus and foxflash Read DQ200 (in manual mode):
Connection:
- Connect foxflash ecu chip tuning tool to computer and Godiag GT107+ via USB cable and main cable separately
- Connect GT107+ to DQ200 gearbox via the Godiag DB9 DSG Gearbox Universal Conversion Jumper according to the pinout
- Connect the 12V 2A DC power supply to foxflash ecu programmer
Operation:
DQ200 TCU: i.e. AUDI GEAR A3 DSG DQ200
Enable network connection and run foxflash manager and software
Log in with the key (SN)
Select driver>> AUDI GEAR>> A3>> DSG DQ200*CAN>> OK
Click “Get ID”
Turn on the dashboard (ignition)
Read data successfully
Click “Read file”
Enable a new file to save the data
Turn off the dashboard (ignition)
Then turn on (press the GT107+ switch button), and press 120 ohm CAN resistance switch
Read DQ200 TCU data successfully
Finally, turn off the dashboard.
Godiag GT107+ and Kess V2 read DQ200 (in manual mode):
Connection:
- Connect kess v2 ecu programmer to computer and Godiag GT107+ via USB cable and main cable separately
- Then connect GT107+ to DQ200 gearbox via the Godiag DB9 DSG Gearbox Universal Conversion Jumper according to the pinout
- Connect the 12V 2A DC power supply to Godiag GT107+ Adapter
- Press GT107+ Automatic/Manual power analog ignition switch and 120 ohm switch
Operation:
Run kess v2 software (i.e.Ksuite 2.80)
Select car icon
Select car manufacturer, model, year, etc, click “OK”
Identify ECU and save the data
Read and backup gearbox ECU data
Godiag GT107+ and Openport 2.0 read DQ200 (in manual mode):
Connection:
- Connect Openport 2.0 ECU Flash Tool to computer via USB cable, and connect to GT107+ directly
- Connect GT107+ to DQ200 gearbox via the Godiag DB9 DSG Gearbox Universal Conversion Jumper according to the pinout
- Connect the 12V 2A DC power supply to Godiag GT107+ Adapter
- Press GT107+ Automatic/Manual power analog ignition switch and 120 ohm switch
Operation:
Run pcmflash 1.2.0 software
Select ECU: [58] VAG: DQ200/MQB Boot (EEPROM)
Identify the ECU model
Read and backup the original eeprom data successfully
Godiag GT107+ and PCMTuner read DQ200 (better in automatic mode):
- Connect PCMTUNER Magic Car Tool to computer and Godiag GT107+ via USB cable and main cable separately
- Connect GT107+ to DQ200 gearbox via the Godiag DB9 DSG Gearbox Universal Conversion Jumper according to the pinout
- Connect the 12V 2A DC power supply to PCMTuner ECU programmer
Operation:
Run pcmflash software
Select ECU: [58] VAG: DQ200/MQB Boot (EEPROM)
Identify the ECU model
Read and backup the original eeprom data successfully
Read also:
Godiag GT107+ Diagnose/ Read VW DQ250 Gearbox: