Launch X431 ECU & TCU Programmer Standalone can work with PC software to clone VW DQ200 successfully. No need X-Prog3 and X431 tablet.
Here takes 2016 Volkswagen Ameo DQ200 (0AM/0CW) as an example.
Step 1: Download and install PC Software
https://en.cnlaunch.com/products-detail/i-243.html
Step 2: Connect X431 ECU TCU Programmer and computer
Connect the Launch ECU Programmer to the computer using a cable
Step 3: Activate X431 ECU Programmer
Run PC software
The serial number will be automatically recognized from the X431 ECU Programmer.
The activation code needs to be obtained from the envelope of the X431 ECU Programmer.
Click [Activate] (only once, no need to activate it again later).
Step 4: Clone VAG DQ200 gearbox
1.Quickly query the desired ECU by entering DQ200 in the search box.
The search categories include brand, Bosch number, and ECU type. It’s Volkswagen (VW) Ameo 2016 N/A 1500 110 DQ200 (0AM/0CW) Dxx (D/K/G) T.
2.Click [Direct Connection Diagram] to obtain the ECU connection diagram.
3.Follow the diagram to connect the ECU and X-431 ECU& TCU Programmer
4.Click “Connect” to read chip data
5.Read and save EEPROM and Flash data in sequence
6.Select the original EEPROM and Flash data to write into new VAG DQ200 gearbox
Finally, disconnect
VW DQ200 gearbox is perfectly cloned by Launch X431 ECU TCU Programmer with PC software.
Video demo: