Launch X431 X-Prog3 PC Adapter tutorials:
Clone VW & Audi DQ200 transmission computer with X431 X-Prog3 Immobilizer & Key Programmer and X-PROG3 DQ200XX Adapter Cable, works like a charm!
X-Prog3 PC Adapter + X431 X-Prog3= Launch X431 ECU & TCU Programmer
Both work with PC software to read, write and clone ECU & TCU, and also support Data Processing, anti-theft shutdown, and file verification. The main difference is that X431 ECU & TCU Programmer can work alone. No need X431 X-Prog3 and X431 tablet.
Besides, the PC software download links are different. But supports the same function.
- For Launch X431 ECU & TCU Programmer Standalone:
https://en.cnlaunch.com/products-detail/i-243.html
Click Download
- For Launch X-Prog3 GIII PC Adapter
https://en.cnlaunch.com/products-detail/i-40.html
Click Download
Gearbox tested with X431 X-Prog3 Adapter:
VW Ameo 2016 DQ200 (0AM/0CM) TC1766
Audi Q2 2016 DQ200 (0AM/0CM) TC1766
Operation procedure:
1.Download and install X-Prog3 PC Adapter PC Software
2.Connect the X-PROG3 PC ADAPTOR to the computer using a cable, and then connect the X-PROG3 PC ADAPTOR to G3.
3.Run PC software, the serial number is automatically recognized by the X431 X-Prog3 PC Adapter, manually input the activation code which can be obtained from the envelope of the X-Prog3 PC Adapter.
Click [Activate] (only once, no need to activate it again later).
4.Enter DQ200 in the search box to quickly query the desired ECU
The corresponding search result:
l Volkswagen (VW) Ameo 2016 N/A 1500 110 DQ200 (0AM/0CW) Dxx (D/K/G)_TC1766
l Audi Q2 2016 CHZJ 1000 TFSI 116 DQ200 (0AM/0CW) (E/F) G2_ TC1766
5.Go to the operation page
Click [Direct Connection Diagram] to obtain the ECU connection diagram, and then connect the DQ200 transmission computer and Launch X-Prog3 PC Adapter via the X-prog3 DQ200XX gearbox adapter (it’s in the X-Prog 3 PC Adapter package).
For VW Ameo 2016
For Audi Q2 2016
6.Click “Connect” to read chip ID
7.Click “Read EEPROM data” and “Read FLASH data” in sequence, read and save the original data
8.Connect X431 XPROG3 PC Adapter to a new DQ200 transmission computer, and click “Write EEPROM data” and “Write FLASH data” in sequence, select the corresponding original data to write into the new ECU
9.Writing data successfully, click “Disconnect”
For VW Ameo 2016
For Audi Q2 2016
Alright! The above is the related VW/AUDI DQ200 gearbox clone test with X431 X-Prog3 PC Adapter and X431 GIII Xprog3.
X431 X-Prog3 PC Adapter is coming soon! If you are interested in it, please contact our customer service.
Related posts:
How to Clone VW DQ200 Gearbox via Launch X431 ECU TCU Programmer?
How to Clone VW DQ200 Gearbox via Launch X431 ECU TCU Programmer?
Launch X431 ECU & TCU Programmer Features & Support List: