This is a tutorial on how to use OBDSTAR P50 Airbag Reset Tool to repair Toyota 89245-12040 TOKAI RIKA steering angle sensor on bench. Easy done in 2 minutes.
Tools Required
Main Cable
Toyota Steering Angle 89245-12040
Operation Process
Airbag Reset >> 89245-12040(TOKAI RIKA)
*Select the correct menu based on the mark of the module
Click “Guide” at the bottom left to check the best connection method.
Click “Pinout” to connect the harness.
Turn on the power of P004 and connect to ECU.
After the connection is successful, you can find that there are collision data records in the module data.
Click “Erase Crash” button.
Now you need to calibrate the angle back to zero degree.
At zero degree, it will show green.
Disconnect and turn off P004 power to complete.
Once the calibration is completed, we can fix it with a tire to prevent deviation.
When loading, make sure that the steering wheel is centered and key off before installing the angle sensor.