This is a tutorial on how to duplicate BMW HU100R with 2M2 TANK 2 Pro CNC Key Cutting Machine by bitting. The process includes 2 steps: Decode & Cutting. Before that, you’ll need to prepare an original key and a new key blank.
Without further ado, let’s go.
Step1. Decode
Cut by bitting >> HU100R 8 Cuts >> Standard key
Follow the diagram to install the original key.
OK >> Identify >> Continue
The 2M2 TANK 2 Pro CNC machine will start to decode the key…
Remove the key to replace a blank key when decoding finished.
Step2. Cutting
After installation, Cut >> Continue
The 2M2 TANK Key Cutting Machine will start to cut automatically…
Just wait until cutting finished.
Then Turn over the key to cut the other side.
Now the key cutting was completed.
Take out the new key to have a test, it can work normally.
Perfect done.
