GODIAG GT111 Test Platform: for VW/ Audi/ Skoda/ Seat CAN-Bus 3rd & 3.5th generation dashboard IMMO key matching. It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, SUPER VAG, AVDI, ZEDFULL, Xhorse (VVDI), OBDSTAR, Lonsdor, Autel, etc.
GODIAG GT111 has the following main functions:
1. Use POGO PIN to read and write data on the dashboard
2. Offline connection to the dashboard to convert to standard OBD2
3. Perform key chip and instrument synchronization test
4. Independent ignition switch
5. Key induction adapter with light
6. The POGO PIN is more stable to hold and it does not damage the cable
GODIAG GT111 can be used with Xhorse VVDI2 to make dealer keys and conduct usability tests. Please refer to the figure below for the equipment and connection methods used.
After the connection is completed, go to the VVDI2 PC software interface for operation.
Perform some common functional tests. Start with diagnostics: [Read DTCs] -> [Clear DTCs], everything is OK.
Go to IMMO Function: Key Learn. Select the appropriate dashboard.
Test function:
Read Immo Data, everything is OK.
Read KM, everything is OK.
Read EEPROM, still OK.
The operation must be disciplined. Before proceeding to the next step, click [Save File] to save the data.
Click [Make Dealer Key] to start making the key, check [Prepare OEM key], and click [Next]
Prepare OEM key: need special key or OEM key. You must provide an original key ID to prepare OEM key, the OEM key can do online operation. OEM key can start engine directly for 4th immo system. For 5th immo system need learn again.
Input VVDI super transponder to VVDI2 programmer and continue. (Note: If the chip is used, it needs to be wiped clean first)
When the production is completed, the PC software will prompt: Key make okay and locked!
Put the VVDI super transponder into GODIAG GT111 for testing and confirm that the key can be used normally.
This flashing indicates that the key is not recognized
If it turns off for 3 seconds, the key is not recognized or the key chip does not match.
If you want to use GODIAG GT111 to identify the key that has been matched, you can directly put the GT111 key identifier on the key.
1. The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
2. The light of the key identifier flashes for a long time ndicating that the chip key and the vehicle’s IMMO system do not match, and the chip key needs to be re-matched.
3. The light of the key identifier does not flash which means that the vehicle’s IMMO system is faulty Please check the vehicle’s IMMO system.
