Here we’re gonna use Autel MaxiIM IM608 II + GODIAG GT114 to test 2004-2011 Audi A6 Dashboard on bench. With GODIAG, we can detect the key match status during diagnostics, or check if the key works when it’s done.
- Detect Key Status
Connect IM608 PRO II, GT114 and Audi Dashboard.
- The dash indication means that the key is not recognized.
- The light of GODIAG Key Idenfifier flashes for a long time indcating that the chip key and the vehicle’s IMMO system do not matched. The chip key needs to be re-matched.
IMMO >> Accept >> Audi >> Manual selection >> A6 >> 2004-2011 >> OK >> Immo status scan >> Faults
Here we can check all the DTCs, and follow the instructions to repair vehicle.
- Test If The Key Is Generated Successfully
Put the chip into GODIAG Key Idenfifier. And turn ignition on.
- The dash indication means that the key is recognized.
- The light of GODIAG Key Identifier flashes and then goes out indicating that the IMMO chip and the chip key are working property.
- Test The Key Is Work Or Not
- The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
- The light of the key identifier flashes for a long time indicating that the chip key and the vehicle’s IMMO system do not match, and the chip key needs to be re-matched.
- The light of the key identifier does not flash which means that the vehicle’s IMMO system is faulty. Please check the vehicle’s IMMO system.
(Visited 12 times, 1 visits today)
