In this article, we’ll show how to calibrate the mileage on the GEELY R7F701412 Dashboard with OBDSTAR Odo Master.
Required Tools
High-power DC regulated power supply
Main cable
Jumper
P004 adapter
GEELY R7F701412 Dashboard
Make sure to update the software to the latest version before we get started.
Procedure
ODO Meter >> AGREE >> Select the correct brand and MCU type: GEELY >> COOLRAV >> CONTINENTAL(R7F701412)
Tap [Guide] and carefully read the function introduction, menu description and connection methods.
Tap the [Connector Pinout].
Refer to the wiring diagram to make the connection.
After connecting, check [ECU Info.] to verify the information.
This is the original mileage: 30000km, matching the dashboard display.
Before proceeding, back up the data.
Read eeprom(R7F701412) >> OK >> Start >> Save the file
Follow device prompts, go back and tap [Mileage Calibration].
Enter the new mileage: 25666km
The mileage adjustment has been successfully done.
Check [ECU Info.] again to confirm the calibration is complete.
