Lonsdor K518 Pro Key Programmer is able to successfully program 2019 Jeep Cherokee all smart keys lost by OBD. Need to use LONSDOR L-JCD Cable to bypass gateway at the same time.
Step1. Read PIN Code
Immo & remote >> JEEP >> Select from vehicle >> North America >> Cherokee >> 2019 >> Smart key >> Read PIN code
This vehicle requires to use L-JCD cable to communicate, press OK.
Switch ignition off and turn on HAZARD warning lights.
Lonsdor K518 Pro displays PIN code: 67754
Step2. Delete Key
Delete key >> OK
Switch ignition off and turn on HAZARD warning lights.
This function will delete all registered keys, press OK.
Please enter 5-bit PIN code: 67754
Clear completed, please make sure ignition switch is turned off.
Step3. Program Key
Program key >> OK
Switch ignition off and turn on HAZARD warning lights.
Please make sure there are no other wireless devices near the smart key.
Please enter 5-bit PIN code: 67754
After confirmation, please finish the operation below in 30s:
Put the smart key(to be added) at the center console, press-release the unlock button twice, repeat this operation till program completed.
Put the smart key(to be added) at the central console, press & release UNLOCK button twice, repeat this operation till program completed.
Current key count: 1
Programming complete.
To program more keys, just repeat as before.
Test the new key, it can normally work.
Done.
