FGTECH 4 Chinese 386 clone failed to BDM an EDC16C31 from a Mercedes Sprinter today. It wouldn’t even ID it, just said ‘Micro not supported.’ So I guess I need to re-work it. I realise the photo isn’t amazing so I’ve listed all the components I can read. Could someo Continue Reading →
Here are FGTech Galletto Windows 10 installation tips and guides, including how to solve FGTech error “driver is not digitally signed” It’s possible that the PC cannot recognize the device, after you have installed Setup.exe in Windows 8 and made it connected by the USB cable. The reaso Continue Reading →
A lot of Kess V2 (red board) reviews and ideas from a real professional @euromod: … just observe the pcb and random choose some parts on Kess V2 red board , then search them on tme / farnell / etc and also search for the same part on alibaba or similar china site. you will see differ Continue Reading →
KESS V2 5.017 PCB has several versions of the components. C72, D6 and D7 Which one is good? Here you go. C72 components on KESS V2 5.017 main board: D6 and D7 on KESS V2 5.017 board: Kess V2 5.017 Red PCB Component Rework: KESS V2 5.017 PCB from obdexpress.co.uk: Continue Reading →
This is my experience pack software using BDM frame connectors china clone with Ktag 2.23 I have already received the shipment and I have time to test them without problems in Bosch EDC16U1 and in bosch EDC17c46. before using them I have reviewed almost all of these and I have not had Continue Reading →
2018 Latest XPROG-M V5.84 rolled out! it with USB Dongle, NO need activation and Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9. XPROG V5.84 support window system should be windows XP 32bit OR windows 7 64 bit, all the patch Continue Reading →
This is for those looking for a cheap MPPS V21 cable from China. FYI, you are NOT advised to have MPPS V21 China clone! If you have MPPS V21 clone, your interface might be locked. Look here: MPPS V21 = Failure V21 Was released AS A TIME BOMB for clones LOL. Any V21 software will ki Continue Reading →
After reading this thread, I bought a Galletto V54 china clone, and hope it will be as they told me it would be. Here are some tips that I copied from hard-working friends that were willing to help us: Tip 1: obd R-W with temp under 50° only on renault-bosch diesel renault-siemens diesel dont ha Continue Reading →
What’s the main difference between original and clone PCMflash ECU programming tools? It lies in the price and functionality. You’ll get what you pay for. Look here to get more details… Cloned PCMflash works with a device called “KTM OBD” for $400 around; Original PCMflash works Continue Reading →
This is how to open Bosch MED17 ECU: Here: gpt med17 ECU model from Audi a1 1,4tfsi 2016. The problem is that the board is clamped in the housing. After assembly, the unit is pressurized from both sides. If you look at the sides, you can see the place in which it is clamped in thes Continue Reading →
How to use KTMflash to read/write ECUs (Infineon, gearbox, etc) here: 1You have to use software from obdexpress.co.uk 2 ECU flash and the like cannot be installed in your PC/laptop before; that is, for your PC/laptop, it must be the first time to install KTMflash software. You’re asked to Continue Reading →
KTMflash programming tool test report: Read ECU password of VAG TPROT8+: Success! Here you go Interface: Tractrix Inc. – OpenPort 2.0 J2534 ISO/CAN/VPW/PWM PCMflash version: 1.1.94 Language: Auto Select an ECU Here: VAG TPROT8+ To check KTMflash ECU List, please go to Continue Reading →
KTMflash KTMOBD ECU Programmer can read the chip data, change the computer, read transmission data etc at a high speed.here we check how to use KTM FlASH ECU programmer Switch board: 1. The switch board is designed to work with J2534, this device uses the Ktag cables so the user can refer Continue Reading →
Copyright © 2018 | OBDexpress.co.uk
