Xentry PassThru – Questions and Answers

July 11, 2018 sales 0

There are a lot of Xentry PassThru questions frequently asked and answers given by users and folks in http://mhhauto.com/ Hope it helps.   All PassThru versions works as good and as same as SDconnect C4 units? – for xentry, i check all diag files are identical with open shell. – Continue Reading →


How to use Xentry/DAS passthru j2534?

March 21, 2018 sales 0

What is the AVDI recognized by Xentry?  Xentry Passthru is different from from regular Xentry openshell. Xentry passthru does not use SDconnect toolkit. When you launch the program it will give you a dropdown where you can choose which J2534 device (can be found at http://www.obdexpress.co.uk/) Continue Reading →


eCom vs SDConnect C4 vs Xentry Connect

February 6, 2018 sales 0

My thoughts of “eCom vs SDConnect C4 vs Xentry Connect ”:   eCom – laboratory\development tool. Most cheap and light. Can’t be used with DAS\HHT vehicles. Does not support kline communication. Need to be specially setup on any diag sw installation.   SDConnect C4– wo Continue Reading →

sdconnect c4 main unit-03

SD connect C4 LAN & WiFi Configuration Manual

November 18, 2017 sales 0

  Status: I’ve started up SDNC to see if the connection is okay, and it turns green when I connect the multiplexer via LAN, but when I try the wifi it stays red. It can also read out some data from the multiplexer so I am assuming the the multiplexer is working fine too Error: If I Continue Reading →


How to solve SDconnect DAS CAL error number 830

November 6, 2017 sales 0

Issue from sd connect c4 user: Hello  i have installed Xentry/Das. After i made xentry and das registration i have error connection. I have try many bin files but the same. When SDconnect C4recognise car voltage, can’t recognise vin so doesn’t make diagnosis ! Photos of error message:   D Continue Reading →



September 13, 2017 sales 0

This is a copy of an original post in MHH forum. I copied and shared it again because it’s a great write-up and i bet i will benefit more from SDconnect C4 crappy tools.   Thread:SD Connect C4 — avoiding garbage   I’m in the market for an SD connect C4 mercedes benz diagnos Continue Reading →


How to use Xentry/DAS Developer Mode

August 28, 2017 sales 0

  MB Star Diagnosis Xentry/DAS Developer Mode User Manual:   What you need for Xentry/DAS Developer Mode? When & why you should use Developer Mode? How to use Developer Mode step by step?     THE MOST IMPORTANT NOTE: you are trying on your own risk!!!!!!!!   Be very c Continue Reading →