OBDSTAR DC706 clone Chrysler Continental GPEC2A ECU via BOOT successfully!
Requirement:
1.Update ECM software to V30.70
2.Need accessories incl.P004 Adapter and P004 ECU Clone Jumper, main cable and 12V power supply
3.Keep charging to OBDSTAR P004 Adapter, and make sure the network connection is normal during the operation
Operation:
Select ECU Flasher>> ECM>> ECM V30.70>> gpec2a>> Chrysler Continental GPEC2A MPC5674F+25320
Need to connect 12V cables (3 cables), GND (4+5), CAN L (14) and CAN H (6) cables
ECU | TOOL |
A-Pin 23 | 12V (16) |
A-Pin 75 | 12V (16) |
A-Pin 96 | 12V (16) |
A-Pin 72 | GND (4+5) |
A-Pin 33 | CAN L (14) |
A-Pin 57 | CAN H (6) |
Connect 1000Ω
Connect DC706 ECU Tool and GPEC2A ECU properly according to the wiring diagram
Select BOOT and P004 mode, and turn on the switch button of P004 Adapter
Connect ECU- OK
Read EXT EEPROM (25320)- OK
Read INT flash (MPC5674F)- OK
Write EXT EEPROM and INT flash data to a new GPEC2A ECU- OK
OBDSTAR DC706 ECU Tool read and write Chrysler Continental GPEC2A MPC5674F+25320 ECU in BOOT mode perfectly!