Use OBDSTAR DC706 to read Pincode and reset ECU on Peugeot Citroen Bosch ME7.4.4 on Bnech perfectly.
Requirement:
1.Update ECM software to V30.90
2.Need accessories incl.P004 Adapter and P004 ECU Clone Jumper, main cable and 12V power supply
3.Keep charging to OBDSTAR P004 Adapter, and make sure the network connection is normal during the operation
Operation:
Select ECU Flasher>> ECM>> ECM V30.90>> ME7.4.4>> CITROEN BOSCH ME7.4.4 29F400BB+95160
Need to connect 12V cables (2 cables), GND (4+5) and K LINE (7)
| ECU | TOOL |
| B-Pin 4B | 12V (16) |
| C-Pin 2G | 12V (16) |
| C-Pin 4H | 12V (16) |
| B-Pin 2H | K LINE (7) |
Connect DC706 ECU Tool and Citroen ME7.4.4 ECM properly according to the wiring diagram
Select BENCH and P004 mode, and turn on the switch button of P004 Adapter
Connect ECU- OK
Read EXT EEPROM (95160)- OK
Read EXT flash (95160)- OK
Read Pincode OK
Reset ECU OK
Done!
