Xhorse BMW G Series BDC2 Adapter can work with Xhorse VVDI2/VVDI Key Tool Plus Pad/Key Tool MIDI to add new key to BMW G chassis BDC2 module on bench.
This guide will demonstrate how to install and uninstall this adapter easily.
Part 1: Install Xhorse BMW BDC2 Adapter
Locate the 3 alignment markers on both the Xhorse BDC2 Adapter and the BMW BDC2 module.
Carefully position the adapter so the markers match perfectly before applying pressure.
Once aligned, press the adapter firmly downward until it clicks into place.
Engage the locking clip to prevent disconnection during operation.
Part 2: Uninstall Xhorse BMW BDC2 Adapter
First, unlock the clips on the adapter
Then find a clean flat surface and place the BMW G chassis BDC to module on it securely
Use both hands to evenly press down on both sides of the module
At this point, the pin header will smoothly pop up and disconnect from the adapter
Finally, lift the adapter straight up
The three positioning pins ensure the pin headers won’t bend during removal and also prevent injury from forced connection.
Done!
Read also:
