bmw-icom-next-a

ICOM Next + BMW E series CIC = Not A Good Idea

December 7, 2017 sales 0

It’s in the release notes for ISTA-P 3.59.2 that ICOM Next and E series CIC is not a good idea. It does not say why unfortunately. Here you go.   Release Notes ISTA/P P3.59.2 5.1.5. Programming the CICR head unit takes a long time Fault description: The programming of vehicles with CIC Continue Reading →

bmw-inpa-e85-1

TCU Flashing onBMW E85with INPA software

September 20, 2017 sales 0

Here are some tips of how to flash TCU of BMW E85 (Z4) using BMW INPA software with a HQ K+DCAN cable or ICOM A2 emulator (clone ok).   Car: Z4 3.0I with the ZF 6HP19 transmission Purpose:want to test different TCU calibration files on my E85 (Z4)   All should be done via a K+DCAN usb c Continue Reading →

No Image

NCS Expert coding factory setting for bmw ECU

July 29, 2017 sales 0

It’s an instruction on how to do factory setting coding for bmw ECUs, with ICOM A2 emulator running with NCS Expert .   Open NCS, choose Expertmode profile If you don’t have Expertmode profile, load the profile you are always using then click File->Edit profile->ESW/PSW and uncheck t Continue Reading →

bmw-icom-next-wifi-new-generation-1

ICOM NEXT A Reviews, FAQs

May 15, 2017 sales 0

  ICOM NEXT A China clone reviews…here you go. Also, frequently asked questions and answers (FAQs) of icom next a are attached here.   What are the advantages of an ICOM NEXT vs the old ICOM? My current “old” ICOM works fine, just wondering what I’ll gain from up Continue Reading →

No Image

How to build a Power Supply for BMW ICOM

December 2, 2016 sales 0

Best way “I” would build a power supply for icom bmw, buy OBDII Extention, Go to your local salvage place and buy BMW OBDII+20 Pin plug+wires(cut) Then buy power plugs (male and female) from your local electric store and DIY your final product to this forum how much it cost you at the Continue Reading →

cheap-2016-7-bmw-icom-software-hdd-1

ICOM A2 WinKFP program BMW ECU module (TCU)

September 30, 2016 sales 0

This is an instruction on how to update a BMW module with WinKFP software for ICOM A2 emulator.   1 Start WinKFP and select F3:- Update ZUSB 2 Select ECU type and the ECU will appear along with a list of part numbers. 3 Select ok and the main menu will re-appear 4 Select VIN and enter th Continue Reading →

wifi-bmw-icom-a2-b-c-diagnostic-programming-tool-1

BMW E46 ALSZ Module light coding in NCS Expert

September 22, 2016 sales 0

These are the coding options available for coding the ALSZ module of the BMW e46, using ICOM A2 with NCS Expert. Hopefully it’s helpful for someone else.   HEIMLEUCHTEN : home lights activated by flashing high beam with key off HEIMLEUCHTEN_ABBRUCH : home light stop HEIMLEUCHTEN_AL :home l Continue Reading →