Question:
Is it possible to use Yanhua Mini ACDP2 to clone Audi 6HP TCU?
Here is the answer:
Yes, Yanhua ACDP Module 32 is required to work with ACDP-2.
Besides 6HP Bosch TCU, it also supports MPC56X chip DME clone, incl.ME9.0/ MED9.1/ MED9.5/ MED9.5.10/ EDC16C2/ EDC16C8/ EDC16CP31/ EDC16CP35 DME etc.
How to do:
Power on ACDP
Open Mini ACDP App, check if device is connected
Select Module>> K-Line module clone>> 6HP BOSCH (VAG)
Click [Help] icon on the right side to check the accessories required and connection method
Follow it to connect ACDP 2, Yanhua Module 32 and 6HP gearbox correctly
Then perform the functions below one by one.
Step 1: Identify
Step 2: Full backup data
Step 3: Full write data
Use the ACDP standard power adapter (voltage +12V, current>= 2.5A), and ensure the stable network connection and DO NOT pull out the device during it working.
Step 1: Identify
Confirm the system info and save a screenshot
Identify chip info finish
Step 2: Full Backup Data
Read chip data, and save the data file after reading
Backup data success
Step 3: Full write data
Connect Mini ACDP 2 to a new Audi 6HP gearbox TCU
Confirm the system info and save a screenshot
Select the original chip data and write into the new TCU
Don’t cut the power nor pull out the device during the programming
Write chip data successfully
Done!
