Here is the step-by-step guide of Audi A3 Car Error Code Removal with MAXIIM IM608/Auro IM600
First, connect Autel IM608 to the vehicle, enter menu select Diagnostic function then select “AUDI”
Accept their disclaimer, then diagnostic program loading, wait a moment …
Automatic selection: Device can read automatic VIN number by
OBD after that device will select the car’s system.
Manual selection: If u know car mark, Model and years information u can use this option
System selection: If u know car system, u can select directly car system than
you can read all DTC code
Note: The first automatic selection should be preferred.
Here select “Automatic selection” to read VIN
Read the vehicle info:
Vehicle type: Audi A3 2013>
Then press “YES” to continue
Note: Sometimes it may be necessary to choose according to the vehicle feature.
Select“CLHA 1.61 TDI/77KW”
Note:The initial word of the vehicle engine number, the other parts is motor
Diagnosis –automatic selection by can see the all error codes with scan
then communication status..Wait a moment
Error and Number Errors as below:
After the code is read out, press “Quick eraser” to clear,only 1 minute
after the code error clean,press”ESC” to exit and back to the diagnotic menu interface
Done! Audi A3 2015(F) Error Code clear via IM608/IM600 is OK!