Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III

Look here: How to use Digiprog iii to do odometer correction for Citroen c5 x7 2011 93c76

 

Car model: CITROEN C5 TACHO CS 76

 

CITROEN C5 TACHO C76 010 600x432 - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III

 

Requires plug 01
NOTE: The speedometer and the BSI must be programmed.
(BSI see separate instructions)
C5 speedometer C76
Remove and disassemble the speedometer. Find the chip 93C76 (see picture on the following page). Carefully remove the pointer. You should unsolder this chip. First, always make a backup of the chip via the EEPROMM program.
Select the program: Cars / Trucks – CITROEN – C5 – TACHO C76.
The DIGIPROG indicates the old / wrong KM level.
Program the new / correct KM booth and you’re done.
Pictures on the following page

 

CITROEN C5 TACHO CS 76
Disassemble the defective instrument cluster as described below:

CITROEN C5 TACHO C76 05 484x600 - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III

 

Pictures on the following page:

CITROEN C5 TACHO C76 06 576x600 - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III

 

Digiprog3 tech support is always available at www.obdexpress.co.uk

 

Source:http://www.mileageprogrammer.com/digiprog3-citroen-c5-x7-2011-93c76/

favicon - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III - Citroen c5 x7 2011 93c76 Mileage Adjustment With Digiprog III