CGDI MB adds Mercedes Benz old K-line vehicle key programming. Here’s the guide on adding new keys to w202 w208 w210 kline MB
38pin car from 1997 to 1998 via OBD.(Original car key)
New key to be programmed
Step 1: Calculate Password
Connect CGDI Prog with laptop and vehicle
Open CGDI MB software
Go to EIS->Read EIS data
Select Computer Password-> Copy key with key-> Collect data
Follow 7 steps below to collect data
1.Insert original key into EIS and press OK
This is a k-line EIS, the operation is different from the ordinary EIS.
2.Insert key into CGDI MB and wait for collection
3.Insert the car key into EIS 10s and remove
Make sure to twise the key to ON position and turn on
insturment. If failed to do this, pull ouit the ey
and try again. Press OK to continue. 4.Insert the key into EIS
5. Remove the key for 5s and then insert the key into EIS
6.Insert the key into CGDI MB
7. Save the generated files
8.Save the file successfully. Upload the data to calculate password.
Upload data successfully. Press Query Results to calculate pass–done
Copy and paste the pass to EIS Key password area and then save it
Select Generate EE->V051-> Load EIS file
Upload EIS file just saved–>Press Generate Key File–>The key
file was generated successfully
Go to Read/Write Key->IR —>
read the key/chip
Then Open/Write
Smart key choose 41 format, common key and BE key cchoose 51 format
Select a key file and write it.
Write key success.
Test the new key. Works good
