This is a tutorial on how to use Yanhua Mini ACDP + Module 22 to clone GM 6T/6L gearbox. Supports to clone GM gearbox: 6T30/6T35/6T40/6T45/6T50, 6T70/6T75/6T80, 6L45/6L50/6L80/6L90.
Mini ACDP Clone GM 6L50 Gearbox
Note: users can click “Help” for connection diagram.
Tools
GM 6L50 gearbox module
20PIN cable
OBP+ICP adapter
ACDP Host
6LXX interface board
Installation
- Install the interface board to gearbox.
- Short the jumper cap on the OBP+ICP adapter to the CAN-R JOIN side.
- Connect all together.
Operation
Mini ACDP >> GM >> Gearbox clone >> 6L50 >> Full backup data >> Continue
Confirm & save info, click “Continue”.
Save data file.
Connect to new GM 6L50 gearbox, prepare to write the the original data.
Full write data >> Continue
Confirm & save info, click “Continue”.
Load data file to write.
Make sure 2 gearbox models are the same.
Click “Continue”.
Writing chip data finished.
Mini ACDP Clone GM 6T40 Gearbox
Note: users can click “Help” for connection diagram.
Tools
GM 6T40 gearbox module
20PIN cable
OBP+ICP adapter
ACDP Host
6TXX interface board
Installation
- Connect the interface board to gearbox.
- Short circuit the CAN resistor on the OBD+ICP adapter to the “CAN-R Join”.
- Connect all together.
Operation
Mini ACDP >> GM >> Gearbox clone >> 6T40 >> Full backup data >> Continue
Confirm info, click “Continue”.
Save data file.
Connect new GT6T40 gearbox to ACDP Key Master.
Full write data >> Continue
Confirm info, click “Continue”.
Load data file to write.
Make sure 2 gearbox models are the same.
Click “Continue”.
Writing chip data finished.
This is how to perform GM gearbox clone with Mini ACDP Key Master.
