Magic Motorsport Flex version 8.15.0.0 has now been released. With this new software update, Flex—combined with Korhex—allows you to independently unlock DAF Delphi ETC3 UDS control units in Boot Glitch mode right in your workshop.
NOTE: Korhex is a hardware expansion module for Flex designed to provide direct access to the MCU during the unlocking process for supported ECUs. It works in conjunction with the Flex Boot Glitch workflow. Korhex leverages EMFI (Electromagnetic Fault Injection) technology to interact with the processor, enabling the Boot Glitch procedure to be performed.
There is no longer any need to use the RFT service and send the control unit to our laboratories: with Flex and Korhex, you can unlock the Delphi ETC3 UDS and continue immediately with programming.
Use Korhex, connect it to Flex, and manage the unlocking procedure in complete autonomy.
NOTE: In order to access this protocol, you need either the FLS0.20 license or the Flex Full FLS0.5 configuration. (If you are a Flex Full version user, this authorization is already included in your subscription.)
Supported models:
DAF Delphi ETC3 UDS MPC5566
- Working Mode: Boot Glitch
- Memories: Read/ Write/ Checksum Internal Flash, Read/Write External Flash, Full Backup
- Licenses: FLS0.20M/S – FLS0.5M/S
- Connect/Glitch Time: ~ 40 seconds
- Reading Time: ~ 2 minutes
- Writing Time: ~ 2 minutes
Supported vehicles:
- Daf Trucks CF (IV) (2017MY) 10.8L Paccar 24v [MX-11] 362HP
- Daf Trucks CF (IV) (2017MY) 12.9L Paccar 24v [MX-13] 523HP
- Daf Trucks XF 106 (II) (2017MY) 10.8L Paccar 24v [MX-11] 402HP
- Daf Trucks XF 106 (II) (2017MY) 12.9L Paccar 24v [MX-13] 476HP
- Daf Trucks XF 106 (II) (2017MY) 12.9L Paccar 24v [MX-13] 523HP
