Fetrotech Tool Reads BMW BOSCH/ Audi MED9 Flash Data

Fetrotech Tool ECU Programmer has 2 colors of version to support MG1 MD1 EDC16 MED9 MED17 ME17 EDC17 Serial ECU. Black version can be used alone, silver version should work with PCMtuner Tool. Following is a quick demo to show how to read BMW & Audi ECU.

 

Fetrotech Silver + PCMtuner Read BMW Flash Data

Check video:

 

1. Connect Fetrotech Silver to PCMtuner.
2. Connect BMW ECU to Fetrotech Silver via colored jumpers.
3. Connect all together to a PC.

 

Fetrotech Black Read BMW Flash Data

Check video:

 

1. Connect BMW ECU to Fetrotech Black via colored jumpers.
2. Connect to a PC via USB cable.

 

Open Fetrotech Tool software to select ECU model:

Bosch MD(G)1 ECU TC2XX-V1.0.0.3 >> Micro ID >> Read

Read MG1CS003 TC298TP data success.

Save Flash data file.

 

Fetrotech Silver + PCMtuner Read Audi MED9.1 Flash Data

Check video:

1. Plug connector into one side of Fetrotech Silver, connect the other side to PCMtuner.
2. Connect the colored jumper to Fetrotech Silver, the other end to ECU.
3. Connect USB cable to Fetrotech Silver & PC.

Fetrotech Black + PCMtuner Read Audi MED9.1 Flash Data

Check video:

1. Connect MED9 ECU to Fetrotech Black.
2. Connect to PC

 

Open Fetrotech Tool software to select ECU model:

VAG MED9 ECU – V.1.0.1.10 >> Micro ID >> Read

Read data success.

Save data file.

 

www.obdexpress.co.uk