JLR Mangoose SDD Pro not only can diagnose Jaguar, Land Rover, Toyota, and Volvo 2014d, it also can be as a J2534 device to work with Godiag GT107+ DSG Plus Adapter and PCMflash software to read/write VAG DQ200 and DQ250 gearbox data.
Connection:
Insert the PCMTuner USB Dongle to computer
Connect JLR Mangoose SDD Pro to computer and GT107+ Adapter directly
Connect GT107+ and DQ200/DQ250 gearbox via the DB9 DSG gearbox universal conversion jumper
Plug the power supply to GT107+
Press 120 ohm CAN resistance switch
No need to press GT107+ analog ignition switch button now, just press it according to the prompt during the operation.
Godiag GT107+, JLR Mangoose Pro and VAG DQ200 wiring diagram
Godiag GT107+, JLR Mangoose Pro and VAG DQ250 wiring diagram
Operation:
Run pcmflash software
If it appears an updated version notice, click “No” to continue.
Select J2534: Drew: Technologles Inc.-MongoosePro JLR as interface
Select [58]: VAG DQ200/MQB Boot (EEPROM) or [58]: VAG DQ250E/F/MQB Boot (EEPROM)
First, click “Identification”
Click “No” when it asks “Wolud you like to use automatic power control (L-Line)?”
Follow the prompt to press GT107+ switch button. It’s recommended to stay 2 seconds and then press. And then turn ECU power OFF.
Second, click “Read”
It will turn ECU power ON.
Turn ECU Power OFF>> OK
Save the EEPROM data after reading
Done!
Godiag GT107+ DSG Plus and Mangoose SDD Pro read VAG DQ200:
Godiag GT107+ DSG Plus and Mangoose SDD Pro read VAG DQ250:
