Lonsdor K518 Pro/K518 series key programmer updated Peugeot/ Volvo Auto IMMO and BMW BDC (OBD) programming on Jan.2024.
1.K518 PRO/K518 Series Peugeot Auto lmmobilizer Update Info
Update time: January 15, 2024
Function: add key and all keys lost
Support models:
- Europe
- South America
- Australia
- General area
- China
- Middle East
2.K518 PRO/K518 Series Volvo Auto lmmobilizer Update Info
Update time: January 25, 2024
Function: add key and all keys lost
Support models:
- XC60 (2023-)
- XC90 (2023-)
- S90 (2023-)
3.K518PRO/K518 SERIES BMW/BDC/Method 2 (OBD) Update Info
Update time: January 30, 2024
Function: add BDC key via OBD (all keys lost need ISN like normal)
Support models:
BMW BDC module only! FEM still needs bench mode.
Menu path:
Immo& Remote>> BMW>> Select by type>> FEM/BDC>> Method 2 (OBD)
Operation steps:
Step 1: Read key data
Step 2: Backup code
- Select Backup & restore code>> backup code
Step 3: Process FEM/BDC
Step 4: Learn key
Step 5: Test the new key programmed
For example:
BMW X2 BDC new key adding with K518 Pro key programmer
1.Read key data
2.Backup code
3.Process FEM/BDC
It will take about 10 mins to process BDC module, make sure the vehicle battery voltage is not lower than 13V.
Put the working key into the car induction coil to restore code info
Save the SK file
4.Learn key
Load the SK file and select one unused key position to write key with Lonsdor K518Pro
Need to hold the key close to ignition (IMMO) coil, and long press Start button for 10 secs, the key can be used after learning.