CG FC200 ECU Programmer released the latest software V1.2.7.0. It newly added more ECUs for VIN modification, “three not ready”, modifying CALID code, time reset, mileage correction, and also added Volkswagen ECU MG1CA811. Check the detailed update info below and update your device ASAP to get the new features and ECU support.
- Added VIN Modification Support for the Following ECUs:
BOSCH TC2xx:
- MD1CP001, MG1CS003, MD1CP002, MD1CS006
- MG1CP002, MG1CS080, MD1CP004 (SPC5777 / TC298TP)
- MD1CS004, MG1CS001, MG1CS002 (SPC5777 / TC298TP)
- MG1CS111, MD1CP014, MG1CS008 (TC298TP)
- MG1CS016 ~ MG1CS019, MG1CS024, MG1CS026, MG1CS032, MG1CS201
- MD1CS001, MG1CA007
BOSCH TC17xx:
- EDC17U01, EDC17U05, ME17.5.20, MED17.1.61
- EDC17CP74, ME17.7.8, EDC17CP06, EDC17CP16
- DCU17PC42, EDC17CP58, MED17.6.9, EDC17CP68
- EDC17C61, EDC17C47, ME17.8.31, ME17.8.32
- EDC17CP05 (TC1796/TC1797), ME17.8.33, ME17.8.5, ME17.8.7
BOSCH MPC5xx:
- MED9.1, ME9.0, EDC16CP31, EDC16CP35
- EDC16U31, EDC16C2, EDC16C1, ME9.1.1
- MED9.1.1, MED9.1.2
BOSCH ST10xx:
- ME7.7.0, ME7.9.9, ME7.1.1, ME7.8.2, ME7.6.4
CONTINENTAL/Siemens:
- SIM271KE, SIM271DE, SDI6.1, SDI7
- SIMOS8.4x, SID208, SID310, EMS3110
- EMS2511, EMS24xx, GPEC2, GPEC2A
- GPEC3, GPEC4, GPEC4LM
DENSO:
- MB279700-9500 / 9811 / 9801 / 96xx
- RF7x, RF8x, 33920-67P0, R2xx, Pxxx, S5xx, SHxx
- 275700-7082, RA6, 4N14
- 23740-5Sxxx (Gen2), 23740-3Nxxx (Gen1)
- Subaru SH72531, 112800 SH72531
GM:
- E38, E39, E39A, E78, E80, E83, E84, E98
Hyundai/Kia:
- SIM2K_240_ECU, SIM2K_241
- Added ECUs with “three not ready” functions:
Peugeot/Citroen:
- MED17.4.2 TC1767、MED17.4.2_ TC1797、MED17.4.4、MEV17.4、MEVD17.4.4、MEV17.4.2 TC1766、MEV17.4.2_ TC1767
Maserati:
- MED17.3.4、MED17.3.5
Smart:
- ME7.7.0
BMW:
- ME17.2.1
3.Added the function of modifying CALID code:
- ME17.8.8
4.Added time reset function
- Dongfanghong EDC17CV54
- Added mileage correction
- Jiangling EDC17C55
- Added Volkswagen ECU MG1CA811
(Visited 78 times, 1 visits today)
