How to Set Up Super ICOM Pro N3+ Network and Update Firmware?
Super ICOM Pro N3+ is a comprehensive diagnostic scanner which has a one-key switch button to freely switch between ICOM software and J2534/ DoIP software, and can […]
BMW ICOM
Using tips on non-idrive e92 CIC Retrofit Coding in 2020
Problem: trying to code in the CIC i just retrofitted into my non-idrive e92. Got a CIC unit from 2011 E91 which is installed and […]
How to coding E90 2010 CAS3 with Xhorse VVDI 2
Read isn from dme then read isn from cas How to write new isn to the cas? Need to replace ecu Car: e90 2010 cas3 […]
BMW ISTA cannot read faults on EHC module, but INPA can
I got ISTA BMW software up and running, where it would read data from my car, but it shows every module as okay with no […]
BMW E46 ALSZ Module light coding in NCS Expert
These are the coding options available for coding the ALSZ module of the BMW e46, using ICOM A2 with NCS Expert. Hopefully it’s helpful for […]
BMW Diagnostic & Programming on 2011 E9x/E82 – ISTA or INPA/DIS?
There are many BMW diagnostic tools in the market, like ICOM A2 with ISTA D/P, K+DCAN cable with INPA, and OPS with DIS or SSS. […]
(Solved) INPA Error IFH-0009: NO RESPONSE FROM CONTROL UNIT
INPA error IFH-0009 No Response usually means a break down (or lack of) communication between the vehicle itself, and the laptop. More often than not, IFH-0009 […]
Update BWM E38 OBD II port to D-bus diagnostic port
Old BMW E38 and E46 have 20 PIN underhood connector rather than standard OBD II 16 Pin diagnostic socket. In contrast, the OBD II port […]
BMW reset short circuit counter with EDIABAS Tool32
If your BMW NFRM is locked after short circuit, you need to reset short circuit counter in order for the headlight to work. This can […]
