This is my experience pack software using Tech 2 RS232 and TIS2000 Today, I will test myself to check if they can not fully record your memory card through TIS2000 software or not, because yesterday I wrote them by the laptop, looking ahead of you, I just want to remove the old soft. As in my Continue Reading →
Purpose: I need to replace the remote control door lock receiver (RCDLR) on my European C6. Tool: I have a Tech2 scan tool Reference: According to the “GM Service Manual” it says: “Connect a scan tool to the vehicle using the pass-thru This method require Continue Reading →
Confirmed! Tech II scanner is able to raise and lower the idle! It’s possible for GM vehicles to get the ecm reprogrammed for the fast idle increase. your local dealer should be able to help you out. here is how it works. Subject: Programming ECM For PTO Idle Up Operation Continue Reading →
I hope this review can help someone with the same puzzles as me. Here, i wanna firstshare what i found about the genuine and clone Tech2 with you all… Left -clone; right -real Then in a forum, i was introduced to the one: http://www.obdexpress.co.uk/wholesale/gm-tech2-gm Continue Reading →
Copyright © 2019 | OBDexpress.co.uk
