KESS3 Adds Boot Unlock Module for Locked Bosch MD1 MG1 ECUs
Working with newer locked Bosch MDG1 ECUs can require an unlock step before their memories can be accessed. The latest Alientech KESS3 solution adds a […]
KESS3
Alientech KESS3 Promotion: Up to 67% Savings!
If you are an existing KESS3 user, it’s time to level up your workshop’s efficiency. Alientech has just announced an incredible, limited-time promotional event designed […]
Alientech Kess V3 Software Subscription: New Renewal Terms
Dear Alientech Kess3 Users, Please be advised of an important update concerning Kess V3 software subscriptions. Starting March 27, 2026, KESS3 subscription will adopt a […]
Alientech KESS3 Update: New Real-Time DataLogger Feature Released
ALIENTECH has officially released the DataLogger feature for KESS V3 ECU & TCU Programmer. This update allows technicians to monitor ECU parameters in real-time under […]
Alientech KESS3 Add Read Ford SID212 ECU on Bench Mode
Exclusive Global Release! Alientech KESS3 has released a new protocol specifically designed for the Continental SID212 ECU. The SID212 ECU has been used in numerous […]
2026 Best 5 ECU Programmers: MQB48 & MD1/ MG1 Cloning Guide
In 2026, navigating the complexities of modern vehicle electronics—such as encrypted MQB48 systems and Bosch MD1/MG1 controllers—requires more than just standard diagnostic tools. www.obdexpress.co.uk has […]
Alientech KESS3 & ECM Titanium 50% Off, Only 100 Left!
THIS IS IT! The final major promotion of 2025 – the Alientech Winter Specia – is here with UNBEATABLE savings: UP TO 50% OFF on […]
KESS3 Adds OBD VR Protocol to Yamaha 2024/25 Motorcycles
Alientech KESS3 now supports OBD VR (Virtual Read) access for the Yamaha XSR 900 GP and YZF-R9 motorcycles, requiring the latest software version V2.34. Both […]
Renew Your Expired KESS3 Subscription Now & Save Hundreds!
Attention all ALIENTECH KESS3 users! If your subscription has expired for more than 60 days, now is the perfect time to renew at an unbeatable […]
New ALIENTECH KESS3 Master: Specialized TCU Protocol Tool
ALIENTECH has launched the KESS3 Master TCU Activation Package, a dedicated tool for Transmission Control Unit (TCU) programming, available from May 21st. Specially designed for customers […]
Alientech Kess3 May Flash Sale: Save Up to 50% OFF
Alientech KESS V3 May Flash Sale runs from May 12 to June 16, 2025. Take advantage of the best pricing of the year on protocol […]
AutoTuner vs. Alientech KESS V3 ECU Programmer
What is the difference between AuroTuner and Alientech Kess V3? Both AutoTuner and Alientech KESS3 are popular ECU programming tools used by professionals for […]
ALIENTECH KESS3 Christmas & New Year Sale: 50% Off
ALIENTECH KESS3 Christmas & New Year Sale has been arrived! Lasts one month from 16th, Dec. 2024 to 16th, Jan. 2025. Up to 50% off […]
KESS V3 Update Scania Truck Motorola EMS10 Reprogram and Clone
Alientech KESS3 ECU Programmer newly released the latest Upgrade-Pack for long-distance vehicles: reprogram and clone ECUs on newly supported heavy-duty vehicles with five new protocols […]
How to Diagnose and Reset DTC by KESS V3?
How to use Alientech Kess3 ECU Programmer to diagnose and reset DTCs in a car or motorcycle? Check the guide below. Main steps: 1.Make […]
ALIENTECH KESS3 function upgrade: Detect and reset vehicle DTC
A new feature upgrade is now available on the Alientech-branded reprogramming tool. The new “DTC” feature of ALIENTECH KESS3 allows you to view and reset […]
Alientech KESS3 Update Hyundi/KIA Continental SIM2K-140 via Boot
Alientech KESS3 ECU Programmer released a new upgrade on May 29th, 2024. Now it can support Hyundai/KIA Continental SIM2K-140 and more ECUs reading, writing and […]
KESS V3 Update Ford Bosch DCU17PC43 ECUs Read Write via OBD
Alientech KESS V3 ECU Programmer released a new upgrade on May 22nd, 2024. Now it can read and write the Bosch DCU17PC43 ECUs equipped on […]
Alientech KESS V3 Read/Write Isuzu Denso 276700-2051 Truck?
Question: Can Alientech KESS3 read and write Isuzu truck with Denso 276700-2051 ECU? Via OBD or Bench? Obdexpress.co.uk engineer replied: Yes, Kess V3 can […]
Alientech Kess3 Update JCB Delphi DCM7.24 ECUs in Boot Mode
Now Alientech Kess3 ECU Programmer can support tuning and cloning for JCB brand Heavy-duty vehicles with Delphi DCM7.24 ECUs in BOOT mode. The newest software […]
