Russian users bought Xprog 6.12 clone & share feedback

Share Xprog 6.12 Reviews from several Russian users.

Xprog 6.12 Review 1.

Seen on Xprog 6.12 alone, this flies the certificate, as on the 584 version.

Editing epromprom solves the problem, but the dongle is connected with both software and FT232RL and if one thing is screwed up, then the repair will obviously not be cheap

Stick the proger and then the dongle and you will see the communication between them. Change RL and write down your crap with your native one and you will understand what I’m talking about. each RL has its id number

Xprog 6.12 Review 2.

I tested the xprog for a couple of days. In principle, it works, but slowly. Compared to J-Link and Renesas Flash Programmer. I also checked with mochi. With HC11E9 in the security board. 908AZ60 in the new adapter. 9S12DG128 from GBO Landirenzo, as a security guard. Broke off with 9S12XEQ384. When reading reports that there is a defense. Offers to erase or remove protection. When removing protection, it costs different times on the bypass of the security and falls out in the communication of terror. It didn’t work out for me, in general … There is still motya XEP100, but there is generally sadness – it does not see BDM. Most likely not alive. Renesas reads writes R7F701xxx. SPC56AP54 turned up on the non-CPC – also all in a bundle. Yeprom did not check, because muveton . You can take it. I did not understand the installation of software. So much “no way.” that you can go crazy. I have an autoprogram folder on drive D. Avast was told not to look in her direction. I dumped a folder with software into it. I started the regfile. I put the dongle and the progger into USB itself. Launched a program. I tried to call the help … Reinstalled reader 11. In the course there was 10. The Internet did not disconnect. It works so far. Does it make sense to make a copy of the FT232? In the user of an aria is what? I myself look, just now I remembered about its existence.

Dealt with the mots 9S12XEQ384 and 9S12XEP768. He got the last one today in MT22.1. She also did not want to break up. He lifted all his legs and it worked. After calculating that it was enough to raise only the reset. The first one was more interesting. I removed quartz from it. But in fact, it was necessary to remove the capacitor to ground. I would never have thought that he would be so hurt. You need to look at why the small amplitude at the outlet of the adapter. I do not like it. Moody technique – I want to work, I want to not work. Well, in general, actually all! Progger test passed!

 

Xprog 6.12 Review 3.

I bought myself a hprog 6.12. Not afraid of the Internet. It is not necessary to keep it on the desktop. I put it in the “Program Files” folder and sent a shortcut to the desktop. The program works. I read to them its industry sites 95020, 24s64 and 9S12DP512, which is in the Vagov tape recorder. I did not read the script from this chip, but I read both the flash and its industry. The sleeping KIA Sorento airbag unit with the MAC7242 processor did not succumb. I do not know why.

The programmer itself is made very high quality, complete with all the adapters from the old igroskog and one adapter with rounded corners from the already new version. A disk with a program, a jitag loop, a power adapter and very good quality usb lace.

 

Question: What is stated in 6.12 from the MPC55XX series?

Answer: everything that is open in authorizations is supported.

Screen from version 6.12 of the kit:

bought Xprog 6.12 clone review 900x417 - Russian users bought Xprog 6.12 clone & share feedback - Russian users bought Xprog 6.12 clone & share feedback
Bought Xprog 6.12 Clone Review

www.obdexpress.co.uk

(Visited 108 times, 1 visits today)
favicon - Russian users bought Xprog 6.12 clone & share feedback - Russian users bought Xprog 6.12 clone & share feedback