Autel IM608 Key ID46 All Keys Lost Programming No Problem

I have one Autel MaxiIM IM608, and one day I used it to program a Key ID 46 for Mitsubishi Outlander 2007, all keys lost, this is the key that I want to program:

autel maxiim im608 key id46 all key lost 01 - Autel IM608 Key ID46 All Keys Lost Programming No Problem

 

This is original key.

autel maxiim im608 key id46 all key lost 02 - Autel IM608 Key ID46 All Keys Lost Programming No Problem

 

Because I don’t have the correct chip to program, I got error “The key couldn’t be registered because the key was wrong type. “.

autel maxiim im608 key id46 all key lost 03 - Autel IM608 Key ID46 All Keys Lost Programming No Problem

 

Then I consult in the Autel MaxiIM IM608 group, many locksmiths gave me advice, among them I pick up two here, hope it helps you too if you have the same problem.

 

  1. Make sure the 46 chip has Mitsubishi data inside it. Not a normal 7936.

Connect programmer and turn ignition on when prompted. If you put an unprogrammed key into it and turn ignition on you will get immo lockout for 35 minutes.

 

  1. For the key that you want to program, Xhorse Condor Mini Plus is able to cut the key for you, if you don’t have one Condor, ask someone for help.

autel maxiim im608 key id46 all key lost 04 - Autel IM608 Key ID46 All Keys Lost Programming No Problem

(image: Xhorse Condor Mini Plus)

 

 

Autel IM608 and Xhorse Condor tech support: https://www.obdexpress.co.uk/

favicon - Autel IM608 Key ID46 All Keys Lost Programming No Problem