Question: when using Yanhua Digimaster 3 to correct mileage for 2008 Nissan Altima, it is not necessary to weld, but use the Yanhua Single Probe Solderless Connector.
In the following image, read the details of Yanhua Solderless adapter:
Next, obdexpress.co.uk will show you how to use Yanhua Solderless adapter.
Use power cables connect to Digimaster3 and Yanhua Solderless adapter.
Then use chip clip or Puncture socket connect the chip and Yanhua Solderless adapter.
The red line need match Pin 1 of the chip.
Select the corresponding chip model through “Choose” on the adapter.
For example, my dashboard computer is from 2009 Volkswagen Bora and chip number is 24C32, so I gonna choose 24XXX, then press test, start pin detection. If the pin detection fails, please adjust chip clip and press test again.
When pass the pin detection, connect the adapter and Digimaster3.
On Digimaster3, choose “Meter System”.
Choose “Europe”, then “Volkswagen”, then “Bora”, then “18G920826”, then “2009” and next.
Check the original mileage, press “Yes”.
Save the original data.
Now we can program the new mileage, then choose ok.
Okay, program new data successfully.
Alright, one little Yanhua Solderless adapter plays an important role in assisting Yanhua Digimaster 3 odometer correction without soldering.
