VNCI J2534 Nano is a device that works between diagnostic software and vehicle. It supports the most all of J2534 compatible software (HDS, TIS, ODIS, VIDA, PCMFLash…) & ELM327 software (ELMConfig, Forscan, ScanMaster…), works well on J1979 compatible vehicle diagnosis and ECU reprogramming in J2534 mode with programming voltage. All software and VNCI NANO driver require to be installed before using. Follow this guide to free download and install software and driver.
Note:
You’d better install the software and driver on Win8, Win10, Win11 32 bit or 64 bit.
Win7 is not recommended. It’s not stable to install the driver.
Turn off the anti-virus software, do not use anti-virus.
All software free download links:
- VAG ODIS 9.10: https://mega.nz/file/aihm0AIT#_YgcOUa9QUxrg92PFo1rK0zU-Gx-Wy_7B2iCC49QiO4
Size: 16.32 GB
Language: English, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech, Russia, Greece, Chinese
- Toyota 17.00.020/17.20.013: https://mega.nz/file/6ZABzbxS#PNHECjMr1S7mDMGWuOOK-6icrSV5cFsL2FbZONEg01c
Size: 588.9 MB
Language: English, French, Spanish, Japanese, German, Italian, Russian, Turkish, Chinese
- HDS HONDA 3.104.024 :
https://mega.nz/file/JgtEkb4K#jDs8le68Bz6soLyJ9H7LB061C3_BvbKgnIwA1dp7JzE
Size: 4.06 GB
Language: English, German, Czech, Dutch, Finnish, French, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Russian, Slovenian, Spanish, Swedish, Turkish, Japanese, Chinese
- JLR SDD 163:
https://mega.nz/file/DJ4FySzY#n8sa8xFRArey0k8XeK8KAERioOmO7u7knf5DrQHAhmk
Size: 3.01 GB
Language: German, English, Spanish, French, Italian, Dutch, Portuguese, Russian, Japanese, Chinese, Korean
- Forscan 2.3.48:
https://mega.nz/file/XQ4kAQBI#4CujUR7XKRnQ0_MsXcQvryumnHruPmy9qNdpahqIeYQ
Size: 31.7 MB
Language: English, Russian, Polish, Italian, German, Hungarian, Turkish, French, Latvian, Bosnian, Finnish, Romanian, Portuguese, Chinese, Czech, Lithuanian, Slovak, Ukrainian
- ScanMaster-ELM V2.1:
https://mega.nz/file/PQpynZDD#mNdKmUxh6FHqGUdvb8LQEJgb5Y3_W4X_-I7uXVK1hdo
Size: 16.3 MB
Language: English, Czech, German, Spanish, French, Hungarian, Italian, Polish, Serbian, Turkish, Danish, Croatian
- PCMFlash 1.20 :
https://mega.nz/file/TIw1EBwY#hIclEWBhhU9ByjLgoQrCRG8VRTOb82I0m51oEGyxiPQ
Size: 11.8 MB
Language: English, Russian
Note: Customers need to buy a PCMTuner dongle (Item No. SE157-S), that only supports the OBD mode, and does not support Bench, Boot, VAG, DSG, and gearboxes.
- VNCI NANO Driver:
https://mega.nz/file/iERnEL7R#KEEKbXzuHx7spOV-3fRz1EkEbJHemANwGjHv1fXq7Bk
Size: 36.8 MB
How to connect VNCI NANO to these software and install?
Each software needs to select VNCI NANO interface when using.
The anti-theft function of HDS software needs to change the registry before it can be used.
The Volkswagen ODIS software is difficult to install and needs to be solved by the customer.
Do not change the installation path of all software during installation. By default, they are installed on the C drive.
For more operation steps, check VNCI J2534 NANO User Manual.
More info of VNCI Nano device.
- VNCI J2534 Nano protocol configuration:
- ISO15765 (Standard/Extended frame).
- ISO9141.
- ISO14230.
- J1850 PWM (Support IFR and 2X speed mode).
- J1850 VPW (Support 4X speed mode).
- Programming voltage.
- Short to ground.
- ELM327 with command set version 1.5a
- VNCI J2534 Nano hardware configuration:
- ISO11898-2 high speed CAN (OBDII PIN 6 and PIN 14. Speed up to 1000Kbps).
- ISO9141 and ISO14230 K line (OBDII PIN 7 and PIN 15).
- J1850 PWM (OBDII PIN 2 and PIN 10).
- J1850 VPW (OBDII PIN 2).
- Programming voltage (OBDII PIN 12 or PIN 13. Programming voltage up to 20V).
- Short to ground (OBDII PIN 9. Short to OBDII PIN5).
- Dimension(L*W*H): 95mm*55mm*23mm
- Environmental:-20℃-45℃(-4℉-113℉)
- Vehicle voltage requirements: 8-18V DC
- Vehicle connection: Molded DLC3(OBDII-16)
- Host connection: USB 2.0
Source: https://www.obdexpress.co.uk/wholesale/vnci-j2534-nano.html
