Yanhua Mini ACDP + Module 28 is able to clone ZF-9HP gearbox BOOT mode, support Jaguar, Land Rover, Chrysler, Dodge, Fiat, Honda, Jeep, etc. Follow the tutorial to learn the procedure.
*Users can check connection diagram in “Help”.
Accessories Required
ACDP host
OBP+ICP adapter
20PIN cable
8PIN cable
ZF-9HP-Port interface board
ZF-9HP-BOOT interface board
Copper pillars
Screwdriver
ZF-9HP gearbox computer
Connection
- Remove the 3 screws of the interface board, install the copper pillars. Put the CPU positioning frame on the CPU.
- Install ZF-9HP BOOT interface board. Lock it with copper pillars. Install ZF-9HP port interface board. Connect 2 interface boards with 8PIN cable.
- Connect OBP+ICP adapter with 20PIN cable.
- Short the CAN resistor on the OBP+ICP adapter to the “CAN-R-JOIN” side. Connect to ACDP host.
Operation
Step1. Backup Data
Mini ACDP>> Jaguar/Land Rover >> Gearbox clone >> ZF_9HP(BOOT) >> Identify >> Continue
Confirm system info.
BOOT pin status detection passed.
Continue >> Continue >> OK
Identify system info finished.
Full backup data >> Continue >> Continue >> Continue
Save data file.
Step2. Write Data
Connect another ZF-9HP gearbox computer.
Full write data >> Continue >> Continue >> Continue >> Load data file
Ready to write chip data, please don’t cut the power nor pull out the device during the programming!
Click “Continue”.
Writing chip data finished.