OBDSTAR DC706 ECU Tool is a ECU flasher used for vehicle ECM, TCM, body and other system. Supports to read ECU info, read & write Eeprom/Dflash/Pflash/MAP, reset ECU(virgin), calibrate mileage, read IMMO pincode, recover ECU by OBD or bench mode.
Supported ECU Manufacturers:
ALPS, Autoliv, Bosch, Continental, Delphi, Denso, Johnson Controls, Lear, Magneti Marelli, Siemens, Temic, Valeo.
Supported Car:
ASTON MARTIN, BMW, FAW, FCA(ALFA ROMEO, CHRYSLER, DODGE, FIAT…), FORD/LINCOLN, GM/OPEL, HYUNDAI/KIA, LAND ROVER/JAGUAR, LUXGEN, MASERATI, MAZDA, MITSUBISHI, NISSAN, OPEL, PSA, SMART, SUBARU, SUZUKI, VOLVO, VW/AUDI/SEAT/SKODA.
Supported Motorcycle:
APRILIA, BRP, CFMOTO, DERBI, GILERA, GUZZI, PEUGEOT, PIAGGIO, QJBENELLI, VESPA.
OBDSTAR DC706 Clone Volvo MPS6 TCM by Bench
- Accessories
DC706
Main cable
P004 adapter
P004 jumper
MPS6 TCM
- Operation
ECU flasher >> TCM >> Latest version >> Volvo Getrag MPS6 TC1766(BENCH) >> Guide/Pinout
Connect all accessories together according to instructions.
Turn P004 adapter switch to ON, DO NOT press ignition button.
Start >> Connect
This function is available by connecting the server, please ensure the internet connection is normal.
Switch ignition off.
Turn on the ignition.
Now we can check ECU info, read & write INT/EXT eeprom, read & write INT flash.
OBDSTAR DC706 Clone FCA RFHUB/RFHM by Bench
- Accessories
DC706
Main cable
P004 adapter
P004 jumper
FCA RFHUB/RFHM module
- Operation
ECU flasher >> Body/Other >> Latest version >> FCA keyless continental 9S12XEQ384/9S12XEG384/9S12XET512+95640(BENCH) >> Guide/Pinout
Connect all together according to instructions.
Turn ignition on and switch to ON.
Start >> OK >> Connect
Now we can read & write eeprom, pflash, pincode as needed.
OBDSTAR DC706 Clone GM ACDelco E39AECM by Bench
- Accessories
DC706
Main cable
P004 adapter
P004 jumper
ACDelco E39A ECM
- Operation
ECU Flasher >> ECM >> Latest version >> Buick ACDelco E39A(BENCH) >> Guide/Pinout
Connect all together according to instructions.
Turn on ignition & switch.
Start >>standard mode/ recovery mode >>OK >> Connect
Now we can start to clone.
