This is a tutorial on how to use Launch X431 IMMO Plus to program Honda all smart keys lost by OBD. Read and learn to do it in 1 minute. The procedure also goes the same for X431 IMMO Pro.
Connect X431 IMMO Plus to car OBD:
IMMO >> Honda >> Anti-Theft Key Matching >> All Honda Smart Keys Lost
Turn the ignition switch to off.
(Don’t press the foot brake and press the engine start/stop button.)
Please take a keyless access remote into the vehicle.
Can you turn the ignition switch on by normal operation? Yes
Do not insert the keyless access remote even if the keyless access remote slot is available.
Turn the ignition switch to on.
(Don’t press the foot brake and press the engine start/stop button twice.)
Enter the numbers of Honda smart keys to be registered: 1
Turn the ignition switch to off.
(Don’t press the foot brake and press the engine start/stop button.)
Do not insert the keyless accessr remote even if the keyless access remote slot is available.
Turn the ignition switch to on.
(Don’t press the foot brake and press the engine start/stop button.)
Does the keyless access remote and immobilizer indicator light go off? Yes.
Turn the ignition switch to off.
(Don’t press the foot brake and press the engine start/stop button.)
Do not insert the keyless access remote even if the keyless access remote slot is available.
Turn the ignition switch to on.
(Don’t press the foot brake and press the engine start/stop button twice.)
Keyless function is registered too.
Since this keyless remote is united with the immobilizer key. The immobilizer key has been registered at the same time by this operation.
It is not necessary to register or delete the immobilizer key separately.
The registration has been completed.
Turn the ignition switch to off.
Attention:
Check all keys to ensure each will start the engine.
Check all keys to ensure each will lock and unlock the doors.
Do not insert the keyless access remote even if the keyless access remote slot is available.
Turn the ignition switch to on.
(Don’t press the foot brake and press the engine start/stop button twice.)
Done.
