All three tools—Autel IM608, Yanhua ACDP, and CGDI CG100X—can disable the active factory alarm on 2018+ Jaguar Land Rover (JLR) All-Keys-Lost (AKL) situations, but they […]
The new LONSDOR JL30-01 and JL30-11 Smart Key support Jaguar and Land Rover models from both pre-2018 and 2018+ generations, featuring direct data copy, dual-frequency […]
Before using Korhex Boot Glitch Tool for the first time, activation is required. If you cannot locate the serial number, follow the guide below to […]
Flex version 8.27.0.0 expands Korhex support to Bosch MDG1 control units equipped with TC298 and TC299 processors. For supported VAG Group ECUs, the new protocol […]
Learn what a flashing red LED on Magic Motorsport Korhex means and how to identify normal operation during ECU access, BOOT glitch procedures, and Flex […]
Korhex Boot Glitch and MCU Access Tool is an EMFI add-on for Magic Motorsport Flex ECU Programmer. It is made for locked ECUs that normally […]
Problem: A customer used YANHUA Mini ACDP + Module 45 and encountered the error “Write routine data error.” The diagram showed a 7-pin connector, but […]
The latest Magic Motorsport Flex V8.26.0.0 software update adds Korhex support for Bosch MD1CS069 and MD1CS089 engine control units used in commercial and industrial vehicles. […]
I used the Autel MaxiIM IM608 II to program for a 2024-2025 Hyundai Sonata all keys lost. The job took less than 4 minutes. Make […]
If you are replacing a lost key on a 2016 Toyota Levin, here is the full process using Lonsdor K518 Pro key programmer and TY8A […]
The latest XIRDecoder Software Version 3.9 adds MAHINDRA MD1CS018 ECU and BMW solution. Check the details below. What’s New in Version 3.9 MAHINDRA (MD1CS018) – […]
The CGDI CG100X has been updated to software V2.2.0.0, expanding chip support and vehicle coverage across five functional areas. This release adds 96 chips to […]
Attention OBDSTAR users! If you are currently working with OBDSTAR tools like X300 DP Plus, Key Master DP Plus, X300 Pro4, or Key Master 5, […]
What’s New: ALIENTECH KESS3 introduces new BOOT Unlock and BENCH read/write protocols for protected Bosch MD1CP017 “Locked” ECUs fitted to the latest-generation Jaguar and Land […]
OBDSTAR has released new software updates for Citroen, Peugeot, DS, and Toyota key programming. These updates apply to X300 classic G3, X300 Pro4, and X300 […]
Xirdecoder DTC Software V3.9 is now officially available. This update focuses on interface adjustments, file export stability, and expanded ECU processing capabilities. Official Security Notice […]
15 YEARS. BIG SALE. BIG SAVINGS! 🔥 Save up to 60% and up to €2,390 OFF — only from September 30 to October 30, 2026! […]
I’ve used enough scan tools to know that a long feature list doesn’t tell you much about how a tablet actually performs in a workshop. […]
This guide covers the procedure for unlocking, reading, and writing locked Bosch MD1 CP006 engine control units found on Ford F-250 and F-350 trucks using […]
If your Flex ECU Tool instantly shuts down and drops its USB connection while trying to Boot Glitch a Bosch MG1CS028 ECU from a Land […]
Copyright © 2026 | OBDexpress.co.uk
